Topic: Engine running lumpy - EML on - then off again?? (Read 823 times)

denerinian · « **on:** 02 March 2009, 17:48:52 »

Hi all
Need some help / ideas please - Started my car this afternoon, after using it most of the day , and the engine imediately ran very lumpy and eml came on - was'nt far from home so managed to get home but eml went off during the journey and car running smoother - but will only run smooth if revs increased slowly - a sharp dab on the accelerator pedal and it will run lumpy like a misfire - but will run quite smooth at 3, 4, 5k revs - I checked on my cheapo code reader but no fault stored - any ideas what i should check - a similar fault has happened before to me and that fault code was egr but this corrected itself without cleaning egr valve - maybe has fault re-occured?? egr need cleaning ??

ians · « **Reply #1 on:** 02 March 2009, 18:07:48 »

have you checked for leaking camcover seals/flooded plugs/coilpack?

denerinian · « **Reply #2 on:** 02 March 2009, 19:18:17 »

Just had cam cover seal changed last month so should be all clean - i'll check in the morning though - thx

cem_devecioglu · « **Reply #3 on:** 02 March 2009, 19:25:19 »

try blocking EGR with a metal plate..but dont plug off..

if the fault occurs again then its not EGR..

Andyb · « **Reply #4 on:** 02 March 2009, 20:31:22 »

more than possible dis pack

News:

Author Topic: Engine running lumpy - EML on - then off again?? (Read 823 times)

denerinian

Engine running lumpy - EML on - then off again??

ians

Re: Engine running lumpy - EML on - then off again??

denerinian

Re: Engine running lumpy - EML on - then off again??

cem_devecioglu

Re: Engine running lumpy - EML on - then off again??

Andyb

Re: Engine running lumpy - EML on - then off again??