Topic: Siezed Spark Plug (Read 1345 times)

RobG · « **on:** 18 March 2009, 20:07:21 »

Just done a service (oil,filters,plugs et al) plus brake work (as previous post). Could only change 3 of the 4 plugs (yes I know I should have SIX

). The plug at the bulkhead is in solid. Camcover gaskets were done about 6 months ago and couldn`t shift it then so it`s had a good soak in oil

. Anything else I can use to try and unsieze it. Was thinking maybe Plusgas :-/ any other suggestions. I`ve tried as much elbow grease as I dare for fear of snapping the damn thing.

HGV mechanic · « **Reply #1 on:** 18 March 2009, 20:20:32 »

have you tried with the engine hot, give it a bit of stick and it will go

RobG · « **Reply #2 on:** 18 March 2009, 20:35:12 »

Cheers HGV will give it a go tomorrow.

Nothing to lose

News:

Author Topic: Siezed Spark Plug (Read 1345 times)

RobG

Siezed Spark Plug

HGV mechanic

Re: Siezed Spark Plug

RobG

Re: Siezed Spark Plug