Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: "how to" on AR35 auto solenoid change  (Read 2027 times)

0 Members and 1 Guest are viewing this topic.

copcar_omega

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 10
    • View Profile
"how to" on AR35 auto solenoid change
« on: 11 April 2009, 13:25:38 »
Hi. Anyone know of a "how to" on changing the 2/3 gear solenoid in an AR35? Is it accessible through the sump pan opening when it's removed? I had one replaced about a year ago to fix a shifting problem that has since returned. Have a good mechanic available willing to give it a go! Don't want to do expensive work on it as I plan to do only about 3k miles in the next year. Cheers!
Logged

unlucky alf

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • worksop, notts
  • Posts: 2394
  • this is some MOT advisory list!.
    • View Profile
Re: "how to" on AR35 auto solenoid change
« Reply #1 on: 11 April 2009, 13:45:25 »
yup you get to them by removing the large sump, if i recall there are 4 solenoids held in by a roll pin, easy enough to get out but dont ask me how to i/d which is which :-/
Logged

copcar_omega

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 10
    • View Profile
Re: "how to" on AR35 auto solenoid change
« Reply #2 on: 11 April 2009, 16:28:59 »
Cheers Unlucky Alf. Do you know if all the solenoids look the same? :-?
Logged

unlucky alf

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • worksop, notts
  • Posts: 2394
  • this is some MOT advisory list!.
    • View Profile
Re: "how to" on AR35 auto solenoid change
« Reply #3 on: 11 April 2009, 16:36:14 »
 ive got a set i took out of an old box for somebody but they never got back to me, & as far as i can remember they look the same. :y
Logged

MartinP

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Dudley
  • Posts: 605
    • BMW 320D
    • View Profile
Re: "how to" on AR35 auto solenoid change
« Reply #4 on: 11 April 2009, 21:29:50 »
When I did mine, I had to drop the gallery plate as the tension pin wouldn't pull out.

About 6 bolts, when you take it off 2, 6mm (ish) ball bearings drop out and then you think OH S**T   >:( >:(

They locate in 2 of the channel outlets on the steel plate bolted to the cast iron gallery plate, I determined the positions by a small chamfer on the hole to seat the bearing.

When together ok after that
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.013 seconds with 17 queries.