Topic: x30xe and c30xe flywheels (Read 993 times)

vxlgsi · « **on:** 23 August 2009, 09:46:15 »

Hello, can anyone tell me if the flywheels on these engines are the same...?

thanks
Ben

vxlgsi · « **Reply #1 on:** 23 August 2009, 13:36:17 »

up up up

somone must know?

JasonH · « **Reply #2 on:** 23 August 2009, 20:36:30 »

I don't think they are but it may fit.

I think pretty much all the Omega V6's have different part numbers for the flywheel: 3.2, 3.0, 2.6, 2.5. Which is odd considering there are only 2 manual gearboxes.

Is the c30xe a dual mass flywheel? The Omegas are so if you're planning a swap you will probably need to do something with the clutch.

vxlgsi · « **Reply #3 on:** 24 August 2009, 13:32:28 »

Yes they are dual mass, the problem i have is that i make lightweight single mass versions and we do the c30se and the c30xe, just trying to find out if the x30xe uses the same flywheel.

JasonH · « **Reply #4 on:** 24 August 2009, 21:23:48 »

I have a spare X25XE flywheel, I'm in Bristol. You're welcome to take a look.

vxlgsi · « **Reply #5 on:** 25 August 2009, 13:47:07 »

is the x25xe the same as the x30xe dual mass?

News:

Author Topic: x30xe and c30xe flywheels (Read 993 times)

vxlgsi

x30xe and c30xe flywheels

vxlgsi

Re: x30xe and c30xe flywheels

JasonH

Re: x30xe and c30xe flywheels

vxlgsi

Re: x30xe and c30xe flywheels

JasonH

Re: x30xe and c30xe flywheels

vxlgsi

Re: x30xe and c30xe flywheels