Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Andy B]

I would recommend skimming them.......

I wouldn't   by the time you've got to the stage where you might be thinking about a skim, it's afair bet that the discs will be near their min thickness anyway. You've have to fork out for machining (I tried to skin a pair at work, all clocked up in the lathe etc etc ........ they were a mile out when fitted - a local machinist is unlikely to be able to do better that I did)
Buy a new pair .... they're around £100 for discs & pads from vauxhall on Trade Club

Don't buy pattern, unless you want to repeat the process   

[plym ian]

what are the best pad and discs to buy?

[Andy B]

what are the best pad and discs to buy?

Vauxhall's on Trade Club   
OK their pads might not be the best, but they're certainly up to the job. Gixerchris will tell you that the 'proper' Vauxhall pads are hands down the better pad .... but they're £75-ish a set!  :-?

[plym ian]

what are the best pad and discs to buy?

Vauxhall's on Trade Club   
OK their pads might not be the best, but they're certainly up to the job. Gixerchris will tell you that the 'proper' Vauxhall pads are hands down the better pad .... but they're £75-ish a set!  :-?

cheers bit pricey will look into them

[Andy B]

what are the best pad and discs to buy?

Vauxhall's on Trade Club   
OK their pads might not be the best, but they're certainly up to the job. Gixerchris will tell you that the 'proper' Vauxhall pads are hands down the better pad .... but they're £75-ish a set!  :-?

cheers bit pricey will look into them

Ordinary Trade Club pads are good enough for the rest of OOF mortals though