Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[duaneyb1]

hello guys got fault code up
00071 - Intake Air Temperature Voltage High
Not present
what does this mean?
Many Thanks

[Brikhead]

hello guys got fault code up
00071 - Intake Air Temperature Voltage High
Not present
what does this mean?
Many Thanks

I'd say it was an old stored code, is the e.m.l. on whilst you are driving?

[duaneyb1]

i did clear all codes with "My Naff Code Reader" but the same code has come back and engine management light stays on!

[Brikhead]

First thing I would do is check the wiring/connectors to the I.A.T. sensor, it should be in the large pipe from the airfilter to the multi ram system, usually before the MAF sensor.
If they look good then you either try and decipher any live readings you can glean from the "My Naff Code Reader", or remove the sensor and bench test it by comparing values with known parameters, or  just take a chance and replace the sensor and keep your fingers crossed!