Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bob.dent]

I know this has been covered before but can't find the threads. I'm getting Low Beam Fld/vision check coming up on the MID - what is the cause?

[jonnycool]

It's a problem with your self-levelling headlights - either a sensor arm has popped off its socket on the wishbone at the front of the car or on the suspension on the n/s back, or a levelling sensor has gone kaputt, or the levelling motor has gone on one of the headlights

[bob.dent]

It's a problem with your self-levelling headlights - either a sensor arm has popped off its socket on the wishbone at the front of the car or on the suspension on the n/s back, or a levelling sensor has gone kaputt, or the levelling motor has gone on one of the headlights

Ah yes, that rings a bell now, thanks for that. Looks like a trip back to the garage then to find out which of those is causing the problem.

[bob.dent]

Turns out to be the nearside front wishbone sensor is broken so if anyone has spare one will willingly buy.

[TheBoy]

Bob - PM me you address, I'll post you one.

If the connector is the same, dead easy to change.  There are 2 different connectors, I will post some loom as well, but that will need soldering if yours is the other type.

[bob.dent]

Bob - PM me you address, I'll post you one.

If the connector is the same, dead easy to change.  There are 2 different connectors, I will post some loom as well, but that will need soldering if yours is the other type.

Cheers Jaime, you're a star - PM sent.