Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1] 2  All   Go Down

Author Topic: i require more advice from the master - cyl head  (Read 2081 times)

0 Members and 1 Guest are viewing this topic.

Gaffers

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • NE Hampshire/Surrey
  • Posts: 11322
    • Ford Ranger Wildtrak
    • View Profile
i require more advice from the master - cyl head
« on: 08 July 2011, 16:51:31 »
Iafyer starting work on the second head I noticed that there is some damage in the head face.  It's about a grain size but the location worries me. 

 

 

 
Logged

Bionic

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Leicester
  • Posts: 1300
  • Why drive anything else?
    • 1999 F/L 3.0 Elite saloon
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #1 on: 08 July 2011, 17:03:51 »
HM.  :o
That would worry me too and I would have something done about it as it will be definite weak spot even with a new gasket fitted.
Sorry the news could not be better though but I have no easy fix or solution to repair, or even attempt to repair it.
A really daft idea has just occurred and that would be to literally hammer a bit of lead into the hole and smooth it flat which would then support the new gasket. Worth a try if you are desperate and coin is a problem...... ;)
Logged
Too old to suffer, too young to die!
Autobahnstormers Trade Cards now accepted at Drive Leicester and at Marshall's Vauxhall.

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39777
    • ML350 TDM SmartRoadster
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #2 on: 08 July 2011, 17:07:45 »
I suppose you could have it welded & then skimmed, but cost wise I'd go for A N Other head.
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37573
    • Zafira Tourer & BMW 435i
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #3 on: 08 July 2011, 17:09:51 »
thats very deep and just appears to be in that area  :-/

Thats going to need a lot of skimming to get it smooth, new head?  :'(
Logged

Gaffers

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • NE Hampshire/Surrey
  • Posts: 11322
    • Ford Ranger Wildtrak
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #4 on: 08 July 2011, 17:12:41 »
That's just it, I got it off here :(
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39777
    • ML350 TDM SmartRoadster
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #5 on: 08 July 2011, 17:16:53 »
Quote
That's just it, I got it off here :(

Bugger!

Couldn't you return it .......... take some friends from work with you  ::)  ::)  ::)  ;D  ;D
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37573
    • Zafira Tourer & BMW 435i
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #6 on: 08 July 2011, 17:17:28 »
Quote
That's just it, I got it off here :(

Ohh  :(
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36417
    • Jaguar XE 25t, Westfield
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #7 on: 08 July 2011, 17:25:35 »
Well, it's not actually under a fire ring - that area looks to be separating the water jacket and a coolant return channel so it may not be under much pressure and, if it did fail there again, leakage might not be much of an issue. :-/

Maybe you could get away with filling it with epoxy and sanding flat, or just add a little sealant in that area before bolting down the head.

Looking at that head the gasket had clearly failed in that area before, and the corrosion around the waterways makes me wonder if the coolant had ever been changed.

Kevin
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

Gaffers

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • NE Hampshire/Surrey
  • Posts: 11322
    • Ford Ranger Wildtrak
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #8 on: 08 July 2011, 17:30:13 »
Well I have both epoxy and sealant so which do you recommend?

That is the worst spot on the heads... The other one cleaned up nicely
Logged

henryd

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • west cornwall
  • Posts: 8806
  • VW Touareg R5 tdi Auto
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #9 on: 08 July 2011, 17:48:09 »
Quote
Well I have both epoxy and sealant so which do you recommend?

That is the worst spot on the heads... The other one cleaned up nicely

I would clean the rust out of the damage and fill the area with JB weld and leave overnight then file and finally sand until the area is smooth like the rest of the head,as Kevin says its not near the fire ring so not quite as crucial
« Last Edit: 08 July 2011, 17:49:19 by henryd123 »
Logged
other rides 
  mk3 Volvo v70 2.0 Diesel ,Citroen C2, Pug 306 cabriolet
  Sterling elite trekker pikey wagon

Gaffers

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • NE Hampshire/Surrey
  • Posts: 11322
    • Ford Ranger Wildtrak
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #10 on: 08 July 2011, 18:40:19 »
JB weld is difficult to find in the UK.  Would super steel work as well?
« Last Edit: 08 July 2011, 18:46:33 by mrgaffney »
Logged

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: i require more advice from the master - cyl head
« Reply #11 on: 08 July 2011, 19:01:30 »
Quote
JB weld is difficult to find in the UK.  Would super steel work as well?

Hey mate try ebay - http://cgi.ebay.co.uk/J-B-Weld-Industrial-Strength-Adhesive-JB-Cold-Auto-Weld-/250846560732?pt=LH_DefaultDomain_3&hash=item3a679ec1dc  ;)
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio

Gaffers

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • NE Hampshire/Surrey
  • Posts: 11322
    • Ford Ranger Wildtrak
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #12 on: 08 July 2011, 19:19:04 »
Quote
Quote
JB weld is difficult to find in the UK.  Would super steel work as well?

Hey mate try ebay - http://cgi.ebay.co.uk/J-B-Weld-Industrial-Strength-Adhesive-JB-Cold-Auto-Weld-/250846560732?pt=LH_DefaultDomain_3&hash=item3a679ec1dc  ;)

I need it now.  Project has to be done this weekend.
Logged

tidla

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • solihull
  • Posts: 4097
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #13 on: 08 July 2011, 19:30:21 »
most motor spares stock jb weld.

edit

lecturer told me a story once that he "fixed" a cylinder wall with jb which had been grooved by the gudeon pin becoming free...!! ;D
« Last Edit: 08 July 2011, 19:34:17 by tapper888 »
Logged

Matchless

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Nottingham
  • Posts: 1563
    • A white van
    • View Profile
Re: i require more advice from the master - cyl head
« Reply #14 on: 08 July 2011, 20:28:52 »
My local Halfords stock JB Weld, seem to remember it wasnt in an obvious place though.
You must clean out the rust to clean alloy before filling....a Dremmel would be ideal.
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.