News:

Please check the Forum Guidelines at the top of the Newbie section

Main Menu

CRUISE LOOM

Started by ffcgary1, 16 August 2007, 19:39:37

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Print
Go Down Pages1
User actions

ffcgary1

16 August 2007, 19:39:37
I am tring to install the brake switch[4 pin] to my 97 v6.and have only got 2 wires going to the switch.is there another plug that i have to find to connect to the new 4 pin switch :o
Elite leather, cruise control, 3.0ltr cams, gas flowed 3.0ltr inlet manifold, 4 bar fuel pressure regulator, rear side window demisters, rear electric windows. projectors /HID'S, h/l washers.
Jaguar XJ6

TheBoy

#1
16 August 2007, 19:51:31
Try it with the existing brake switch - some seem to have weird wiring and only need 2 pin switch  :-/
Grumpy old man

ffcgary1

#2
16 August 2007, 20:50:49
That would confir what i thought mate as the elite that i took the clutch switch from also had a two pin switch. ::)
Elite leather, cruise control, 3.0ltr cams, gas flowed 3.0ltr inlet manifold, 4 bar fuel pressure regulator, rear side window demisters, rear electric windows. projectors /HID'S, h/l washers.
Jaguar XJ6

TheBoy

#3
16 August 2007, 20:59:31
QuoteThat would confir what i thought mate as the elite that i took the clutch switch from also had a two pin switch. ::)
Yeah, tried to get to bottom of this before, whether the autos had a single 4 pin brake switch, and the manuals have a 2 pin clutch and 2 pin brake.  Alas, the response were inconclusive...
Grumpy old man
Print
Go Up Pages1
User actions