Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[V6drift]

my new mig has the siemens ncdc 2013 audio system fitted.
does anyone know if this unit has any RCA pre-outs for adding another amp?
i,m wanting to fit my old 1000WRMS digital class D amp and 15" sub if possible.

cheers 

[TheBoy]

no

[Del Boy]

Will look like it's been chavved up if you ask me.

[TheBoy]

1000W RMS. Off 12v? PMSL.

[Dave DND]

1000W RMS. Off 12v? PMSL.

Kilowatt RMS is very easily achieved -

TB stop showing your age   

[V6drift]

years ago my showcar mk3 astra estate ran 2 of these monoblock competition amps and 4 15" subs 
thats 2000wrms at 1ohm stable, cracked 150db, also cracked the windscreen 
ive still got an amp and 2 subs under the bed begging to be used 

so to do this i must change the complete head unit then?  :question

or what wattage is the standard bose amp in my car as i could just upgrade the sub instead?  :question

[V6drift]

Will look like it's been chavved up if you ask me.

not if its done right, some systems look factory fitted 

[TheBoy]

1000W RMS. Off 12v? PMSL.

Kilowatt RMS is very easily achieved -

TB stop showing your age   

With std batteries/alternators etc? Presumably it would be on its own 12v supply, but that would need constant charging?

1kW rms, thats going to be around 1.5kW peak, so 125A cable.  Thats assuming very high efficiency.

[V6drift]

1000W RMS. Off 12v? PMSL.

Kilowatt RMS is very easily achieved -

TB stop showing your age   

With std batteries/alternators etc? Presumably it would be on its own 12v supply, but that would need constant charging?

1kW rms, thats going to be around 1.5kW peak, so 125A cable.  Thats assuming very high efficiency.

i always ran the standard gear but needed the engine running constant at shows.
i used o-gauge cable, thats about 1" thick with a 300 amp fuse.
you could,nt really run anymore power than that without a split charging system although it worked.
the people who had money ran second alternators and loads of batteries.

[Dave DND]

If you just want to tap off a single set of RCA, then you can use this

http://www.dndservices.co.uk/pc1-610.html

but if you want to use a full set of RCA then this is better

http://www.dndservices.co.uk/pc9-451.html

 

[V6drift]

If you just want to tap off a single set of RCA, then you can use this

http://www.dndservices.co.uk/pc1-610.html

but if you want to use a full set of RCA then this is better

http://www.dndservices.co.uk/pc9-451.html

 

cheers for that dave, id fogotten about those 
could i tap into the wires for the rear bose sub and run a short RCA to the new amp then??? 

[Dave DND]

No, if you are running BOSE then you will have to tap into the rear of the head unit, (or the inputs of the BOSE amp.)

The output of the BOSE amp is far too sensitive to cope with this additional loading

[V6drift]

oh right, thanks for the useful advice