Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Multi function radio  (Read 1082 times)

0 Members and 1 Guest are viewing this topic.

Omega Man

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Oxfordshire
  • Posts: 57
    • View Profile
Multi function radio
« on: 27 March 2011, 22:36:17 »
I switched off the ignition and noticed the radio was still lit up. I turned the ignition back on and the radio wouldnt turn on or off. Switched off the ignition and tried again still nothing and the light permanently on :( Removed fuse no. 20 and the light on the radio went out, replaced and the radio seems to be ok :y Is there still a problem or is this a one off :-?
Logged

Dave DND

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • DND Services Ltd
  • Posts: 4216
    • Paignton, Devon
    • View Profile
    • DND Services Ltd
Re: Multi function radio
« Reply #1 on: 27 March 2011, 22:55:53 »
A radio model number would help ?

Suggest to remove radio for 1 hour, refit, and re-enter code, and see how it goes.

 ;)
Logged
Radio & Decoding Technician
In Car Audio Service Department
www.dndservices.co.uk

Omega Man

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Oxfordshire
  • Posts: 57
    • View Profile
Re: Multi function radio
« Reply #2 on: 27 March 2011, 23:00:39 »
Its a Siemens VDO NCDC 2013 :y
Logged

Dave DND

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • DND Services Ltd
  • Posts: 4216
    • Paignton, Devon
    • View Profile
    • DND Services Ltd
Re: Multi function radio
« Reply #3 on: 27 March 2011, 23:27:45 »
In that case, definately remove radio for 1 hour, refit, and re-enter code - this will reboot it.

Don`t bother removing fuses instead, as does not reboot the radio correctly.
Logged
Radio & Decoding Technician
In Car Audio Service Department
www.dndservices.co.uk

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106857
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Multi function radio
« Reply #4 on: 28 March 2011, 08:45:43 »
Quote
In that case, definately remove radio for 1 hour, refit, and re-enter code - this will reboot it.

Don`t bother removing fuses instead, as does not reboot the radio correctly.
No code on that until, Mr DND ;)


OP - after opening and closing drivers door with the key out of ignition, do windows still work? If so, suspect the ignition switch and/or W contact staying live...
Logged
Grumpy old man
Pages: [1]   Go Up
« previous next »
 

Page created in 0.014 seconds with 17 queries.