Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: 1 2 [3]  All   Go Down

Author Topic: car can't start  (Read 4787 times)

0 Members and 1 Guest are viewing this topic.

fiend61

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • york
  • Posts: 1544
  • each to their own
    • 2.5cdx 3.0mv6 3.2vec c
    • View Profile
Re: car can't start
« Reply #30 on: 25 November 2011, 15:10:00 »
Quote
what could be causing some misfire

i assume you have plugged everything back in and none of the coilpacks are damaged nor any oil in plugwells ?
Logged

gibby

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • braintree
  • Posts: 145
    • View Profile
Re: car can't start
« Reply #31 on: 25 November 2011, 19:13:28 »
Quote from: fiend61 on 25 November 2011, 15:10:00
Quote
what could be causing some misfire

i assume you have plugged everything back in and none of the coilpacks are damaged nor any oil in plugwells ?

thax, will try to check some oil in the plugs  :y
Logged

gibby

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • braintree
  • Posts: 145
    • View Profile
Re: car can't start
« Reply #32 on: 25 November 2011, 21:09:14 »
Quote from: fiend61 on 25 November 2011, 15:10:00
Quote
what could be causing some misfire

i assume you have plugged everything back in and none of the coilpacks are damaged nor any oil in plugwells ?

it has only one coil pak that runs in the centre of the rocker cover and it feeds all the cylinders
Logged

freecall666

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • looking over your shoulder
  • Posts: 1451
  • fun for all, get with the program
    • 2.0l sweat tank on wheels
    • View Profile
Re: car can't start
« Reply #33 on: 26 November 2011, 09:32:27 »
think you may have a misalligine -alligined engine, means when cam was made it was out of line have heard( ford had some) that there was a few made this way and fixed before testing, you will need to alline it by hand with plugs out and piston at TDC and the cam covers of and check the right vales are in right position. asked at vauxhall and said that there was a mistake in manufacturing. had some on vectras and others, can replace the cam and will be in line.
Logged
Solar charger fitted.
If not Broke dont fix it..

Andy H

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Auckland
  • Posts: 5533
    • Mazda MPV
    • View Profile
Re: car can't start
« Reply #34 on: 27 November 2011, 13:09:23 »
Freecall666 might be on to something.

It seems very odd that the engine was running well with one cam apparently 2 teeth out before the old belt was taken off.

A manufacturing defect that blatant would be unusual but not impossible.

The other possibilities are that the locating peg in the end of the cam is missing or damaged and sprocket is misaligned OR the mark on the belt cover is not what it appears.

The test for misalignment would be to use a protractor on the end of the crank and a dial gauge on the top of a valve follower to check when the valves are opening & closing.
« Last Edit: 27 November 2011, 13:11:00 by Andy H »
Logged
"Deja Moo - The feeling that you've heard this bull somewhere before."

Andy H

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Auckland
  • Posts: 5533
    • Mazda MPV
    • View Profile
Re: car can't start
« Reply #35 on: 27 November 2011, 13:16:36 »
Another possibility is that the cam sprocket was aligned using the wrong slot in the nose. One is used if the sprocket is used on the exhaust camshaft, the other if it is used on the inlet.
Logged
"Deja Moo - The feeling that you've heard this bull somewhere before."

fiend61

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • york
  • Posts: 1544
  • each to their own
    • 2.5cdx 3.0mv6 3.2vec c
    • View Profile
Re: car can't start
« Reply #36 on: 27 November 2011, 14:42:43 »
this hopefully has been sorted with op's post on head torques  :y
Logged

Andy H

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Auckland
  • Posts: 5533
    • Mazda MPV
    • View Profile
Re: car can't start
« Reply #37 on: 27 November 2011, 15:06:03 »
Quote from: fiend61 on 27 November 2011, 14:42:43
this hopefully has been sorted with op's post on head torques  :y
Maybe.

The OP doesn't need to take the pulley off the camshaft though so I don't know if the locating slots will be visible.

What should be visible are the words 'inlet' or 'exhaust' by the timing marks though........
Logged
"Deja Moo - The feeling that you've heard this bull somewhere before."
Pages: 1 2 [3]  All   Go Up
« previous next »
 

Page created in 0.018 seconds with 22 queries.