Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[GastronomicKleptomaniac]

Right. I've got a Clarion headunit, fitted with an ISO connector, working perfectly. I've got a CARK-91 ready to plug into my ancient Nokia, and want to wire it in. I've got the pre-wired 16-pin plug above the glovebox... can I plug in an Autoleads 06-102B, and have it working, to save buggering about with too many wires?

[VXL V6]

Yep, should all plug straight in 

Did you have to switch the +ve and switched +ve on the ISO?

[Dave DND]

Did you have to switch the +ve and switched +ve on the ISO?

Shouldn`t need to alter the wiring on his Clarion, as has a two position fuse on the back

 

[fattyfattyboomalatty]

isnt the 2 position fuse for cars without ignition supply? if he used this position I think it will leave the cark-91 permanently live?

[VXL V6]

It won't affect the phone pre-wiring as it's integrated into the loom so ignition switched etc is still going to presented correctly

[Dave DND]

isnt the 2 position fuse for cars without ignition supply? if he used this position I think it will leave the cark-91 permanently live?

No, the two position fuse is for VW models that take the live from a different pin on the ISO block. Should not affect the voltages on the phone kit though.

 

[GastronomicKleptomaniac]

Ta all, much appreciated

>awaits delivery<

[GastronomicKleptomaniac]

Installed everything, kit remains resolutely silent - having looked at this installation guide -

http://www.nexxia.co.uk/PDF_Files/06-102B.pdf

 - which is subtly different from the one included with the kit, it suggests I need the relay listed here - http://www.ebay.co.uk/itm/Autoleads-06-100B-Telephone-Mute-Relay-Vauxhall-/290438863991?pt=UK_Holders_Mounts&hash=item439f815c77 - is this an essential given it's no longer a VX headunit?

I'd rather double check before putting another pint and a half-worth of dosh through the old Paypal...

[VXL V6]

Was it a 36 Way ISO on the back of the Head unit - ie. did the car loom plug straight in?

[GastronomicKleptomaniac]

Was it a 36 Way ISO on the back of the Head unit - ie. did the car loom plug straight in?

I used a Clarion-VX ISO connector

[GastronomicKleptomaniac]

I knew I had one - tidying the house, just found the 06-100 transformer... it says "plug into position 9, diagnostics" - but that's a diagnostics slot which bears no resemblance to the realy pins, oddly enough...

 There is a spare relay block on position VI - will it plug into there instead, dya reckon?

[VXL V6]

Does the kit mute the Headunit when it receives a call?

[GastronomicKleptomaniac]

Does the kit mute the Headunit when it receives a call?

It doesn't do anything at the moment 

[VXL V6]

OK, does it actually power / charge the phone?

If it does but it doesn't mute the head unit on receiving / making a call then the mute line isn't on the same pin on the new headunit at a guess. Without pulling the mute line on the head unit the audio input won't be triggered.

[Dave DND]

Is the kit designed for use with an OEM stereo, and therefore may not necessarily work with an aftermarket one?