Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega Electrical and Audio Help / Help on Omega Elite V/2000 Audio Installation.

« on: 06 May 2009, 19:39:17 »

I have just bought a new Alpine CDE-W203Ri stereo, which is replacing the CCR-2006 but cannot get the speakers to work. It has the built in BOSS sound system and traffic master but don't know if that would make any diff?
Has anyone got the colour diagrams for the wire loom, if i need to start cutting wires?  :-?

2

Omega General Help / Re: Self Levelling fluid refill?

« on: 10 November 2009, 11:38:13 »

cheers guys, will be fitting them tonight now.

3

Omega General Help / Self Levelling fluid refill?

« on: 10 November 2009, 11:34:21 »

I've managed to get a pair of Self Levelling Shocks, but where do you top the fluid up for them? and has anyone got pictures? it's for a Elite 3l V6 vreg 2000.
Cheers.

4

Omega General Help / Re: Self Levelling Shocks

« on: 04 November 2009, 15:39:31 »

Thanks Guys, so they can't be repaired then shit. Is there any suppliers you can recommend as the vauxhall main dealer want £114 +vat each?

5

Omega General Help / Self Levelling Shocks

« on: 04 November 2009, 14:44:01 »

On the back of my Elite it has leaking self levelling shocks, can these be repaired or has anyone on here got any for sale?

6

Omega General Help / Re: Gearbox warning

« on: 04 October 2009, 20:40:42 »

Thanks Andy  , looks like the garage again then. 

7

Omega General Help / Re: Gearbox warning

« on: 04 October 2009, 20:17:31 »

Don't want to sound stupid, But how do i do that?

8

Omega General Help / Gearbox warning

« on: 04 October 2009, 19:42:20 »

I've got a 3l v6 auto vreg, on my way to work this evening the check automatic gearbox flashed up on the screen. Also the TC light came on the clock display as well, what could this be?

9

Omega General Help / Omega 3l ellite vreg 2000

« on: 05 September 2009, 12:15:46 »

After months of problems and loads of money spent on garage bills, it's still not working properly.
When on a junction in drive the revs will increase it's self and try to move forward, also if you have the heating on cold it will not cut out, but as soon as you turn it to 16 or above it will?
It has got a leak from the o/s manifold, but would that make a difference???
I’ve had both crankshaft sensors changed and the ICV/MAF sensors, is there anything else that I’m missing like the EGR  :question

10

Omega General Help / Manifold?

« on: 09 July 2009, 19:45:10 »

Firstly of all many thanks to all that helped with the cutting out problem, it’s now sorted it was the MAF sensor that was upside down. 
Secondly how hard is it to change the manifold gasket on a 3.0l v6 elite drivers side?
And has anyone got any useful guides/pictures that would help?

11

Omega General Help / Re: Still Cutting Out

« on: 08 July 2009, 17:40:14 »

I have just turned it the right way up, it seemsw to run alot better. Thanks. 

12

Omega General Help / Re: Still Cutting Out

« on: 08 July 2009, 17:30:26 »

Found out the MAF sensor was upside down, the arrow on the pipe was facing down but the sensor arrow up. Would this make any difference??

13

Omega General Help / Re: Still Cutting Out

« on: 02 July 2009, 13:42:33 »

3.0l V6 elite 2000 vreg, it had a  service not long ago.

14

Omega General Help / Still Cutting Out

« on: 02 July 2009, 13:39:10 »

Just had a new IACV and fitted it, but it still will cut out but not all the time. It's only when I’m at a junction at tick over at between 500 & 600 rpm, As from my other posts I’ve had the gearbox oil and filter changed, as well as the left side crank shaft sensor.
Am I missing anything stupid, has anyone else had this problem and how did get fixed?

15

Omega General Help / Re: 3 litre mv6 cutting out when warm

« on: 15 June 2009, 19:19:36 »

I have a 3.0l V6 elite and it's doing the same thing, first i thought it was the gearbox but after having back from Vauxhall on friday it's happened again.
They changed the oil and filter, but going to work this morning it just died around 80ish deg.