Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bob G]

asked a few questions a while back and read both write ups on how to replace the bushes, one thing though they both seem to describe it with wishbones removed, sure I saw it done at Newent with wishbone still in place, is it possible?

[RobG]

http://s696.photobucket.com/albums/vv327/Turkpix/?action=view&current=HowtofitFrontPoly-Bush-1.mp4

[Jimbob]

Easy with wishbone in place....

just undo the one bolt your doing, there is enough room to cut out the old bush and slide in the new one

[Seth]

Or see our Turk () in action doin' 'em:

http://www.youtube.com/watch?v=D5Nfvr_CHQM&feature=channel&list=UL

 

[feeutfo]

asked a few questions a while back and read both write ups on how to replace the bushes, one thing though they both seem to describe it with wishbones removed, sure I saw it done at Newent with wishbone still in place, is it possible?

for fitting poly to the front bush only, yes.
For replacing either bush with another oe, no. As you need a press.