Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1] 2  All   Go Down

Author Topic: Temp gauge not working.  (Read 4043 times)

0 Members and 1 Guest are viewing this topic.

Vauxhalloofer

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • South East
  • Posts: 66
    • Cdx 2.2
    • View Profile
Temp gauge not working.
« on: 10 June 2013, 21:44:04 »

Hi everybody, temp gauge on 2.2 is on zero and the top pipe heats up gradually.Was working before, thermostat housing looks like this one
http://www.ebay.co.uk/itm/Vauxhall-Omega-Vectra-Astra-Zafira-Thermostat-Housing-Stat-/290928393510?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43bcaefd26

but it doesnt have a long bit on it, mine has a short pipe lol .Will this one on ebay fit a y22xe 2.2 2001, as when i changed stat before it wouldnt sit right as housing was worn away inside on the lugs.So wedged it .Thats what makes me think that its the stat and not the gauge.Many Thanks  :-\
Logged

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: Temp gauge not working.
« Reply #1 on: 10 June 2013, 22:10:23 »

Check electrical connector is on temp sensor at back of engine ;)
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39512
    • ML350 TDM SmartRoadster
    • View Profile
Re: Temp gauge not working.
« Reply #2 on: 10 June 2013, 23:23:00 »

Sender unit here. To test the gauge, earth/ground the blue wire from the sender unit & the gauge should show fully hot.

Logged

Vauxhalloofer

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • South East
  • Posts: 66
    • Cdx 2.2
    • View Profile
Re: Temp gauge not working.
« Reply #3 on: 11 June 2013, 20:54:36 »

yep back of mine does'nt look like the picture. It has 2 wire multi plug, then spade in black sleeve somewhere next to it.I have pulled of spade ran to earth nothing. Now i cant see what it goes back on its so tight behind there. I ve got inspection mirror but at the back all i can see is the multi plug and right next to it a rounded off small plug. Nothing for a single wire spade to go on to. Anyone got pic of 2.2 16v rear Thanks
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: Temp gauge not working.
« Reply #4 on: 11 June 2013, 21:03:56 »

Spade connector slides over the round disc at the top of the sender
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Vauxhalloofer

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • South East
  • Posts: 66
    • Cdx 2.2
    • View Profile
Re: Temp gauge not working.
« Reply #5 on: 11 June 2013, 21:07:01 »

Wicked, so that smaller plug must be it. I take it it slides downwards from the top so as to keep it there.Odd connection lol
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39512
    • ML350 TDM SmartRoadster
    • View Profile
Re: Temp gauge not working.
« Reply #6 on: 11 June 2013, 21:13:39 »

Wicked, so that smaller plug must be it. I take it it slides downwards from the top so as to keep it there.Odd connection lol

Slides in from which ever way you want to ...... it's circular  ;)
Pretty sure all my Vauxhalls over the past 20 odd years have been the same  ;)
Logged

Vauxhalloofer

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • South East
  • Posts: 66
    • Cdx 2.2
    • View Profile
Re: Temp gauge not working.
« Reply #7 on: 11 June 2013, 21:32:11 »

Nice one got it back on, still no change on gauge in car, surely it must be that stat was all working ok the other day and as i said i bought a new stat to put in a while back, on fitting it i realised that it was too small in the lug length to sit in the housing so i put part of old one on top of lugs to hold it in.Maybe its stuck its the only thing ive touched, so will this housing fit a 2.2 z22xe.
 http://www.ebay.co.uk/itm/Vauxhall-Omega-Vectra-Astra-Zafira-Thermostat-Housing-Stat-/290928393510?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43bcaefd26
Logged

PhilRich

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • A bit further North of the Back of Beyond!
  • Posts: 10338
    • Mk 2 Volvo V70
    • View Profile
Re: Temp gauge not working.
« Reply #8 on: 11 June 2013, 21:50:20 »

Nice one got it back on, still no change on gauge in car, surely it must be that stat was all working ok the other day and as i said i bought a new stat to put in a while back, on fitting it i realised that it was too small in the lug length to sit in the housing so i put part of old one on top of lugs to hold it in.Maybe its stuck its the only thing ive touched, so will this housing fit a 2.2 z22xe.
 http://www.ebay.co.uk/itm/Vauxhall-Omega-Vectra-Astra-Zafira-Thermostat-Housing-Stat-/290928393510?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43bcaefd26






Yes that's the correct one but this one is cheaper and no better/worse! :y

http://www.ebay.co.uk/itm/Vauxhall-Calibra-VX220-Vectra-Omega-1-8-2-0-2-2-Thermostat-Housing-90501081-OEQ-/330886217369?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4d0a5afe99
Logged
If it ain't broke keep fixing it 'til it is!

Vauxhalloofer

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • South East
  • Posts: 66
    • Cdx 2.2
    • View Profile
Re: Temp gauge not working.
« Reply #9 on: 11 June 2013, 21:58:53 »

Will swap housing and stat then take it from there i think :y Thanks
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39512
    • ML350 TDM SmartRoadster
    • View Profile
Re: Temp gauge not working.
« Reply #10 on: 11 June 2013, 22:03:51 »

.....
I have pulled of spade ran to earth nothing.  .....

Assuming your ignition was on when you earthed the blue wire, if you didn't get any movement on the gauge you have a fault somewhere ie the gauge itself, or wiring up to it.  :-\
Logged

symes

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • oxford
  • Posts: 3488
  • Madness is a state of i dont mind
    • R reg 940 volvo
    • View Profile
Re: Temp gauge not working.
« Reply #11 on: 11 June 2013, 22:45:32 »

.....
I have pulled of spade ran to earth nothing.  .....

Assuming your ignition was on when you earthed the blue wire, if you didn't get any movement on the gauge you have a fault somewhere ie the gauge itself, or wiring up to it.  :-\
most likely cause is the spade on end of wire-changed about 4 so far this year alone ;)
Logged
1998 volvo 940 turbo 225bhp +1965 Rover 5000 v8+ 1962 ford consul 375 lowrider

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39512
    • ML350 TDM SmartRoadster
    • View Profile
Re: Temp gauge not working.
« Reply #12 on: 11 June 2013, 22:50:30 »

.....
I have pulled of spade ran to earth nothing.  .....

Assuming your ignition was on when you earthed the blue wire, if you didn't get any movement on the gauge you have a fault somewhere ie the gauge itself, or wiring up to it.  :-\
most likely cause is the spade on end of wire-changed about 4 so far this year alone ;)

maybe ..... something's amiss.
What does anyone do to a spade connector to make it need to be changed?  ??? The one on my car is OE & is 13 yr old  ;D
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 28300
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Temp gauge not working.
« Reply #13 on: 11 June 2013, 23:40:38 »

.....
I have pulled of spade ran to earth nothing.  .....

Assuming your ignition was on when you earthed the blue wire, if you didn't get any movement on the gauge you have a fault somewhere ie the gauge itself, or wiring up to it.  :-\
most likely cause is the spade on end of wire-changed about 4 so far this year alone ;)
You'd be surprised ::)

maybe ..... something's amiss.
What does anyone do to a spade connector to make it need to be changed?  ??? The one on my car is OE & is 13 yr old  ;D
Logged
Onanists always think outside the box.

ronnyd

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Bury St Edmunds Suffolk
  • Posts: 8686
    • Vectra 1.8 SRI Silver
    • View Profile
Re: Temp gauge not working.
« Reply #14 on: 12 June 2013, 00:17:38 »

Had a couple of gauges stop working on my 95 mig. had to replace dash. :'(
Logged
Pages: [1] 2  All   Go Up
 

Page created in 0.021 seconds with 18 queries.