Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[PhilRich]

Can any of you chaps in the know tell me if this stuff would shield the main Injector wiring loom sufficiently from the heat of the Head/Inlet Manifold?
The plastic cable tray was discarded when the car was Lpg'd and at the moment is wrapped in black cotton amalgamation tape, but i've found that the plastic Stag Lpg loom wiring protector covering is going brittle and breaking into sharp edged sections which are cutting into the wiring insulation
Many Thanks for any help


http://www.ebay.co.uk/itm/50mm-High-Temperature-Heat-Resistant-Kapton-BGA-Tape-Polyimide-/111112032884?pt=LH_DefaultDomain_3&hash=item19decb1274

[chrisgixer]

Re fit the cable tray, mines still fitted. ...?

[dbug]

Try exhaust tape - thats resistant to very high temps - http://www.ebay.co.uk/itm/1x-HIGH-TEMPERATURE-ALUMINIUM-ADHESIVE-TAPE-1-2m-50mm-for-exhaust-pipes-chimney-/280802452259?pt=UK_Crafts_Cardmaking_Scrapbooking_Glue_Tape_EH&hash=item4161216323

[Marks DTM Calib]

Thats kapton tape, we used to sue it on circuit boards for mod wires etc.

Not sure how good it would be in an under bonnet environment

[05omegav6]

Re fit the cable tray, mines still fitted. ...?

OP has a desmond... whether the tray will fit depends on the installation I guess

[albitz]

Can any of you chaps in the know tell me if this stuff would shield the main Injector wiring loom sufficiently from the heat of the Head/Inlet Manifold?
The plastic cable tray was discarded when the car was Lpg'd and at the moment is wrapped in black cotton amalgamation tape, but i've found that the plastic Stag Lpg loom wiring protector covering is going brittle and breaking into sharp edged sections which are cutting into the wiring insulation
Many Thanks for any help


http://www.ebay.co.uk/itm/50mm-High-Temperature-Heat-Resistant-Kapton-BGA-Tape-Polyimide-/111112032884?pt=LH_DefaultDomain_3&hash=item19decb1274

You sure Al.

[Lazydocker]

Can any of you chaps in the know tell me if this stuff would shield the main Injector wiring loom sufficiently from the heat of the Head/Inlet Manifold?
The plastic cable tray was discarded when the car was Lpg'd and at the moment is wrapped in black cotton amalgamation tape, but i've found that the plastic Stag Lpg loom wiring protector covering is going brittle and breaking into sharp edged sections which are cutting into the wiring insulation
Many Thanks for any help


http://www.ebay.co.uk/itm/50mm-High-Temperature-Heat-Resistant-Kapton-BGA-Tape-Polyimide-/111112032884?pt=LH_DefaultDomain_3&hash=item19decb1274

You sure Al.

I thought it was a 4 pot too and it's far easier to bin the cable tray. I just used self amalgamating tape when I taped it up into a loom on the car in the guides

[albitz]

I thought Desmond indicated diesel ? 

[dbug]

I thought Desmond indicated diesel ? 

Desmond Tutu - 2.2 Albs

[albitz]

Ah,I see.You learn something every day on here.

[05omegav6]

 

[PhilRich]

Thanks for all the replies Chaps, i've double wrapped the loom in pvc insulating tape then wrapped it in thick foil and to finish off re-wrapped it in cotton loom almalgamation tape