Topic: shear bolts (Read 1418 times)

samrey4u · « **on:** 02 August 2014, 07:02:41 »

Anyone know the correct size of shear bolts that hold ignition barrel to the steering column tia

05omegav6 · « **Reply #1 on:** 02 August 2014, 07:54:46 »

Didn't think the barrel was bolted $:-\$

biggriffin · « **Reply #2 on:** 02 August 2014, 08:08:34 »

Quote from: Taxi Al on 02 August 2014, 07:54:46

Didn't think the barrel was bolted $:-\$

barrel isn't. But the piece that holds the barrel, steering lock, is held onto the column with two shear bolts.
Think they be dealer only,unless you have a good fastner place local. Think theym6.
can be removed with a good dot punch,by tapping undone, and put back in the same way,fiddlee but doable.

davieboy0312 · « **Reply #3 on:** 02 August 2014, 10:24:37 »

I think there M8 i think?

biggriffin · « **Reply #4 on:** 02 August 2014, 15:41:55 »

You could just use std Allen bolts of the right length.

kevinp58 · « **Reply #5 on:** 02 August 2014, 16:39:29 »

Quote from: davieboy0312 on 02 August 2014, 10:24:37

I think there M8 i think?

Usually steering lock bolts are 8MM

but never done a omega. $:-\$

samrey4u · « **Reply #6 on:** 03 August 2014, 19:23:03 »

thanks for all the reply guys ever helpful as always

News:

Author Topic: shear bolts (Read 1418 times)

samrey4u

shear bolts

05omegav6

Re: shear bolts

biggriffin

Re: shear bolts

davieboy0312

Re: shear bolts

biggriffin

Re: shear bolts

kevinp58

Re: shear bolts

samrey4u

Re: shear bolts