If I'm correct...
To calibrate the battery you must use the phone till it shuts down (0%) then recharge to 100%.
Repeat the above process a few times, Something like that...?
Pretty much, the procedure for handsets that are standard is as follows:
1. Wait for phone to discharge
2. Connect charger (with power off) and allow to charge to 100%
3. Disconnect charger and power phone on
4. Allow phone to run until it self discharges again.
5. Connect charger (with power off) and charge to 100%
6. Reapply charger at around the 10% to 15% indication and charge fully.
That's it.
Do NOT at any time attempt to connect to any form of outside power source during the above process.
If you want to speed things up slightly during the process, leave things like GPS, Location, etc all switched on and you can play with them after the process.
Discharge times will depend on your actual battery capacity, you have an extra 200mAh more than me so you can expect around 3 to 4 days (depending on how much you use it during the draining process).