Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2  All   Go Down

Author Topic: V6 Stalling  (Read 3471 times)

0 Members and 1 Guest are viewing this topic.

ffcgary1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Mitcham,Surrey.
  • Posts: 2805
  • I really must get my eyes seen to.
    • Omega Estate/ jaguar XJ6
    • View Profile
V6 Stalling
« on: 22 March 2015, 18:07:27 »

As per title no idle on 2.5 v6 after a dis pack change, have had the plenum off twice now and checked for air leaks and split vac pipes, found no splits or air leaks.
I have also removed the intake manifold and cleaned everything to within an inch of life and checked all seals and refitted all very carefully.
Car runs and idles lovely untill warm at which point it then hunts and eventually dies.
Car starts first time every time but refuses to idle.
VERY CONFUSED. :-\
« Last Edit: 22 March 2015, 18:10:00 by ffcgary1 »
Logged
Elite leather, cruise control, 3.0ltr cams, gas flowed 3.0ltr inlet manifold, 4 bar fuel pressure regulator, rear side window demisters, rear electric windows. projectors /HID'S, h/l washers.
Jaguar XJ6

chrisgixer

  • Omega Baron
  • *****
  • Offline Offline
  • Woking ham
  • Posts: 2616
  • Banned
    • Irmscher 3.2 Elite lpg
    • View Profile
Re: V6 Stalling
« Reply #1 on: 22 March 2015, 18:10:52 »

Fast idle "choke" not cancelling? Temp sensors working or disturbed?
Logged

05omegav6

  • Guest
Re: V6 Stalling
« Reply #2 on: 22 March 2015, 18:17:07 »

Idle contol valve properly plugged in?
Logged

ffcgary1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Mitcham,Surrey.
  • Posts: 2805
  • I really must get my eyes seen to.
    • Omega Estate/ jaguar XJ6
    • View Profile
Re: V6 Stalling
« Reply #3 on: 22 March 2015, 18:22:10 »

Temp sensors both plugged in and secure, idle control valve a bit loose in the rubber plug but appears not to be leaking. swapped icv for a substitute same symptoms.
Logged
Elite leather, cruise control, 3.0ltr cams, gas flowed 3.0ltr inlet manifold, 4 bar fuel pressure regulator, rear side window demisters, rear electric windows. projectors /HID'S, h/l washers.
Jaguar XJ6

ffcgary1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Mitcham,Surrey.
  • Posts: 2805
  • I really must get my eyes seen to.
    • Omega Estate/ jaguar XJ6
    • View Profile
Re: V6 Stalling
« Reply #4 on: 22 March 2015, 18:24:12 »

Chris what is the fast idle choke? havent heard that term before. ::)
Gasket to the egr vave/plenum replaced as well.
breathers cleaned and new breather box seals fitted.
Throttle body cleaned and seals replaced.
« Last Edit: 22 March 2015, 18:26:25 by ffcgary1 »
Logged
Elite leather, cruise control, 3.0ltr cams, gas flowed 3.0ltr inlet manifold, 4 bar fuel pressure regulator, rear side window demisters, rear electric windows. projectors /HID'S, h/l washers.
Jaguar XJ6

chrisgixer

  • Omega Baron
  • *****
  • Offline Offline
  • Woking ham
  • Posts: 2616
  • Banned
    • Irmscher 3.2 Elite lpg
    • View Profile
Re: V6 Stalling
« Reply #5 on: 22 March 2015, 18:25:17 »

Will it run with minimal throttle? (To replace the idle function)

Throttle position sensor plugged in?
Logged

Nick W

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Chatham, Kent
  • Posts: 10950
  • Rover Metro 1.8VVC
    • 3.0l Elite estate
    • View Profile
Re: V6 Stalling
« Reply #6 on: 22 March 2015, 18:26:54 »

When mine did this, it was the MAF. Checking is easy, disconnect the MAF and see if the problem improves. It will put the MIL on, but that resets as soon as everything is reconnected.
Logged

ffcgary1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Mitcham,Surrey.
  • Posts: 2805
  • I really must get my eyes seen to.
    • Omega Estate/ jaguar XJ6
    • View Profile
Re: V6 Stalling
« Reply #7 on: 22 March 2015, 18:27:19 »

Will run with slight throttle
Logged
Elite leather, cruise control, 3.0ltr cams, gas flowed 3.0ltr inlet manifold, 4 bar fuel pressure regulator, rear side window demisters, rear electric windows. projectors /HID'S, h/l washers.
Jaguar XJ6

chrisgixer

  • Omega Baron
  • *****
  • Offline Offline
  • Woking ham
  • Posts: 2616
  • Banned
    • Irmscher 3.2 Elite lpg
    • View Profile
Re: V6 Stalling
« Reply #8 on: 22 March 2015, 18:27:39 »

Chris what is the fast idle choke? havent heard that term before. ::)

When cold it ticks over a bit faster. Should settle to 550 rpm once warm. But if the ecu still thinks the engine is cold, due to missing sensor info, it might still run rich and bog down.
That was my thinking anyway. Not saying my thinking is correct mind.
Logged

ffcgary1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Mitcham,Surrey.
  • Posts: 2805
  • I really must get my eyes seen to.
    • Omega Estate/ jaguar XJ6
    • View Profile
Re: V6 Stalling
« Reply #9 on: 22 March 2015, 18:28:33 »

Maf disconnected and will not idle at all. so no change.
Logged
Elite leather, cruise control, 3.0ltr cams, gas flowed 3.0ltr inlet manifold, 4 bar fuel pressure regulator, rear side window demisters, rear electric windows. projectors /HID'S, h/l washers.
Jaguar XJ6

chrisgixer

  • Omega Baron
  • *****
  • Offline Offline
  • Woking ham
  • Posts: 2616
  • Banned
    • Irmscher 3.2 Elite lpg
    • View Profile
Re: V6 Stalling
« Reply #10 on: 22 March 2015, 18:34:23 »

Paper clip test for codes :)
Logged

ffcgary1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Mitcham,Surrey.
  • Posts: 2805
  • I really must get my eyes seen to.
    • Omega Estate/ jaguar XJ6
    • View Profile
Re: V6 Stalling
« Reply #11 on: 22 March 2015, 18:53:43 »

I've read that guide several times and have tried it as well, but the readings i get mean jack according to the code lists on here. ;D dont worry the guide is fine its the operator.
Logged
Elite leather, cruise control, 3.0ltr cams, gas flowed 3.0ltr inlet manifold, 4 bar fuel pressure regulator, rear side window demisters, rear electric windows. projectors /HID'S, h/l washers.
Jaguar XJ6

ffcgary1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Mitcham,Surrey.
  • Posts: 2805
  • I really must get my eyes seen to.
    • Omega Estate/ jaguar XJ6
    • View Profile
Re: V6 Stalling
« Reply #12 on: 22 March 2015, 19:15:01 »

will get codes somehow and post up.
Logged
Elite leather, cruise control, 3.0ltr cams, gas flowed 3.0ltr inlet manifold, 4 bar fuel pressure regulator, rear side window demisters, rear electric windows. projectors /HID'S, h/l washers.
Jaguar XJ6

BazaJT

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • SLady bitshorpe N.Lincs.
  • Posts: 9198
    • Omega 3 litre Elite
    • View Profile
Re: V6 Stalling
« Reply #13 on: 22 March 2015, 19:34:06 »

My 3l did this after a cam gasket change.It'd start and run for a few minutes or if revs were kept up it'd keep running but try to let it idle and it'd die.Then you coul start it straight back up again and same would happen.Turned out that when the guy had done the gasket change he'd not quite pushed the connector home for the crank sensor at back of head.Just saying like!
Logged

ffcgary1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Mitcham,Surrey.
  • Posts: 2805
  • I really must get my eyes seen to.
    • Omega Estate/ jaguar XJ6
    • View Profile
Re: V6 Stalling
« Reply #14 on: 22 March 2015, 20:03:46 »

I did check all the plugs at the back when the intake manifold was off, found nothing disconnected plus i would have thought that if the cs was unplugged it would not start.?
Logged
Elite leather, cruise control, 3.0ltr cams, gas flowed 3.0ltr inlet manifold, 4 bar fuel pressure regulator, rear side window demisters, rear electric windows. projectors /HID'S, h/l washers.
Jaguar XJ6
Pages: [1] 2  All   Go Up
 

Page created in 0.013 seconds with 18 queries.