Topic: scanner v pedal trick (Read 1057 times)

omega2018 · « **on:** 28 October 2015, 01:04:12 »

an obd-ii scan of my car showed no stored codes but the pedal trick showed one- 0335 'CrankshaftPosition sensor "A" circuit malfunction' ( which is expected - i have just had to replace the crank sensor)

is this a fault with my scanner or does it happen often? otherwise the scanner seems to be reading the data ok - revs, voltage, engine id etc etc...

zirk · « **Reply #1 on:** 28 October 2015, 08:16:49 »

Ive had that before,, no related codes on the reader but crank sensor on the pedal trick, also had faulty crank and no codes anywhere.

omega2018 · « **Reply #2 on:** 28 October 2015, 12:50:38 »

thanks is that with a cheap bluetooth chinese obd-ii, like mine, or a pucker one? i wonder if it is just my scanner.

zirk · « **Reply #3 on:** 28 October 2015, 17:00:53 »

It was a 80 quid handheld one although that went walkabout when I left it in a potential sellers car and didn't realises until The train trip home.

so I'm on the cheapo +£20 BT one at the moment, the cheapo cheap under 10 quid BT ones are too problematic.

omega2018 · « **Reply #4 on:** 31 October 2015, 19:43:27 »

mine wouldn't read the crank sensor code but it did clear it for me - odd.

also today it read 11 errors codes on a BMW but would only clear 5, on one ecu.

News:

Author Topic: scanner v pedal trick (Read 1057 times)

omega2018

scanner v pedal trick

zirk

Re: scanner v pedal trick

omega2018

Re: scanner v pedal trick

zirk

Re: scanner v pedal trick

omega2018

Re: scanner v pedal trick