Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Webby the Bear]

Will do mate

I'll be honest it's going to beat least a week. snowed under at the garage and going for weekend away this weekend but will keep y'aaall posted

[DrAndyB]

  Cheers 

I was going to give pipes and connectors a check on mine, and I thought the ram sat in different place when engine turned off to when engine on idle ?

Hopefully we can both get sorted.

Fingers crossed its something simple 

[steve6367]

Not sure if either of you got this sorted but I have the same problem on one of my 2.5's.

Both move when tested with diagnostics connected, front moves when throttle blipped.

Rear never moves - not when changing form idle to higher revs or with high RPM.

[Diamond Black Geezer]

Same 'ere

[Webby the Bear]

Hi guys. Nope, didn't sort it. Even with spare ram valve. As there's no eml on I assume it's a new valve needed.

[TheBoy]

Suspect you're all being too soft with it.

If it moves with diag tool, its working (unless someone has put in a non-Omega ECU)

[TheBoy]

Suspect you're all being too soft with it.

If it moves with diag tool, its working (unless someone has put in a non-Omega ECU)

And that's 'dangle berries', as if a non-Omega ECU, diag tool won't move it . What a pleb that TheBoy is.

[sjc]

To test the rear one you need to blip the throttle hard - whack it all the way open quickly.

[DrAndyB]

To test the rear one you need to blip the throttle hard - whack it all the way open quickly.

Same here, rear one seems not to move, even when blipped hard with the front ones coming on !!!

New rear solenoid ?  Plug is in it 

[Webby the Bear]

I assure you I've given it 'death' and still no movement.

[Diamond Black Geezer]

Checking out Mark's tech manual he posted, the rear should move over 4100rpm... as, I'm sure, with Mr The Bear's I ran mine all the way up to the red line, and still nothing.

What I have observed, is that the servo/solenoid thingygummy appears to be identical for the front and rear. Bit of a faff, but surely swapping the front and rear ones round will confirm whether both are working, or that the issue lies somewhere else?

[frostbite]

The rear valve will also  move when the engine starts. I watched them after I replaced the vac tanks,  PO broke the nipples and tried to glue them back on  so non of it was working

[steve6367]

Suspect you're all being too soft with it.

If it moves with diag tool, its working (unless someone has put in a non-Omega ECU)

I have taken it to the red line, or is it also to do with the speed to wide open?

On my 2.5 (non-dbw) my understanding is that it should move between idle and any revs at all also?

[TheBoy]

I needs to be idle to redline as fast as possible, due to the no-load status of the engine when testing. Its a knack

[Diamond Black Geezer]

Currently parked up in the Sikh Temple's car park...might save redlining her until I'm home in the interests of inter-community relations