Topic: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please (Read 1009 times)

Andy A · « **on:** 30 January 2016, 17:16:25 »

As in the tittle says, a post cat gasket part number needed and the part number or the size of bolts for that exhaust flange please.

Thanks

TheBoy · « **Reply #1 on:** 30 January 2016, 18:26:44 »

There are no gaskets post cat.

TheBoy · « **Reply #2 on:** 30 January 2016, 18:27:08 »

2 9157096 8 54 928 GASKET, FRONT EXHAUST PIPE TO MANIFOLD

Is manifold to cat section

Andy A · « **Reply #3 on:** 30 January 2016, 19:53:06 »

Where the exhaust front, post cat connects to the centre section of the exhaust on the flange there is no gasket in there. Are they just a tapered fit then and do I need to re-tighten bolts to seal or should I put some exhaust sealant past in there and then re-tighten the bolts?

I had a new clutch put in a while back and they couldn't of tightened the two bolts up tight enough.

Thanks

TheBoy · « **Reply #4 on:** 30 January 2016, 20:07:31 »

I believe its a taper. Should be fine without paste, but if not, a thin smear of paste before fitting to taper.

Key is to clean it up properly first.

Andy A · « **Reply #5 on:** 30 January 2016, 20:40:48 »

Will do and thanks for the info and advice.

Andy

News:

Author Topic: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please (Read 1009 times)

Andy A

Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please

TheBoy

Re: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please

TheBoy

Re: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please

Andy A

Re: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please

TheBoy

Re: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please

Andy A

Re: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please