Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Marks DTM Calib]

Right, we need to plan the following jobs:

ians - Press a set of wishbone bushes (does this include remove/re-fit wishbones?)
JohnArgraig - Tech 2 work
Mick Dundee - Exhaust manifold gasket
TMX - Tech 2 work + Serpentine belt (do you mean cambelt?)
Jay W - Tech 2 work + pinion oil seal.
JamesV6Cdx - Camber set (if we can find somewhere flat!)
LFF64 - V6 Cambet, water pump and spark plugs + Tech 2 work
Dave C - Camber set (if we can find somewhere flat!)
Entwood - Pimp my ride detailing demo
johnnycboy - Tech 2 work

So, who is up for a bit of grafting?

[Jimbob]

Not really up to doing any of those myself (not that anyone would trust me to work on their cars  ) except maybe gentle tech2ing  

Will be nosing at everything though  

may chuck some checkstrap washers in if anyone needs em!

[Marks DTM Calib]

Well I am hoping that the Captain and LooKnee might do Mick Dundees exhaust manifold so I can get the cambers set and the pinion seal done.

That then leaves Tech2 work and a cambelt or two.....

[Jimbob]

Well I am hoping that the Captain and LooKnee might do Mick Dundees exhaust manifold so I can get the cambers set and the pinion seal done.

That then leaves Tech2 work and a cambelt or two.....

erm you dont fancy another pinion seal do you  mines been gently weeping for years    (I know how much you love that job)

I dont mind taking the tech2 round if it helps anyone out  :-/

[Marks DTM Calib]

Well I am hoping that the Captain and LooKnee might do Mick Dundees exhaust manifold so I can get the cambers set and the pinion seal done.

That then leaves Tech2 work and a cambelt or two.....

erm you dont fancy another pinion seal do you  mines been gently weeping for years    (I know how much you love that job)

I dont mind taking the tech2 round if it helps anyone out  :-/

Have to see how we get on as far as time goes, should be able to fit it in if we get started in reasonable time.  

[Jimbob]

 whats your oil recomendation?  Ill pick up a seal and bottle

[Marks DTM Calib]

 whats your oil recomendation?  Ill pick up a seal and bottle

Standard 80-90 hypoid is fine!

[Jimbob]

cool, ill be by halfords later anyway  

[Jimbob]

is it a 24435952 I need to get as well?

[Darth Loo-knee]

I will do Dundee's exhaust manifold gasket with a little guidence from you, also don't mind doing a cam belt or two on V6's
Sure Captain Zok will help me  
I will bring some tools and Cambelt Locking Kit if its needed

[Elite Pete]

Ive got a new pinion seal here, its for a LSD but I think they're the same

[Jimbob]

Ive got a new pinion seal here, its for a LSD but I think they're the same

Cool, is the number as above?  if so what ya want for it?  obviously without postage  

[TheBoy]

I can do bits, not sure about manifold gasket though!

Wouldn't mind watching the pinion seal being done though, if there is room for a spare head under there?

I'm guessing the Tech2 work won't take long, we can whizz around doing them once the 'dirty' work is finished?  Shouldn't take long, esp with at least 3 Tech2's onsite.


Long range forecast isn't great, some kind of large gazebo/marquee might be needed?  I may have a couple of tarpalines if we need to crawl under cars, to save getting too wet if it rains...

[Elite Pete]

Ive got a new pinion seal here, its for a LSD but I think they're the same

Cool, is the number as above?  if so what ya want for it?  obviously without postage  

20 minutes with the wife  
I'll go and check the part No

[Jimbob]

Ive got a new pinion seal here, its for a LSD but I think they're the same

Cool, is the number as above?  if so what ya want for it?  obviously without postage  

20 minutes with the wife  
I'll go and check the part No

Mine or yours