Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Raeturbo]

https://www.ebay.co.uk/itm/234079680875?fits=Plat_Gen%3AB%7CModel%3AOmega&hash=item36803c796b:g:7FoAAOSwi0lg5SeR
 
             I’ve read some of the aftermarket ones are useless any used these?

[Doctor Gollum]

It will be fine

Even if it only lasts a couple of years, it's cheap enough to be considered a service item...

[Raeturbo]

👍👍

[cam.in.head]

One problem I discovered many years back on a Carlton arm that had been replaced with a non gm one was that it was ever so slightly shorter in length ( bush length) so that when fitted and the nut was tightened to its stop it was still loose on the bracket.
It was rectified at the time with a suitable washer that went over the raised non threaded part of the shaft and made it tighten to its correct stiffness. This arm lasted at least 5 years to my knowledge afterwards.
Just a point to note when fitting l

[Raeturbo]

Thanks👍

[Field Marshal Dr. Opti]

It will be fine

Even if it only lasts a couple of years, it's cheap enough to be considered a service item...

Couple of years?

That may be enough to outlast old Rae.

[Raeturbo]

Watch it mate⚔️