Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tooleater]

Morning Guys,
can anyone let me know if Martin Imber, still rebuilds key fobs as mine is looking looking my rear arches  failing that are there any other key fob surgeons they could recommend.
cheers...

[STEMO]

http://www.imber.me.uk/keyfob.htm

[dave the builder]

Martin did some key fobs for me recently 

[tooleater]

cheers Dave 
Now for the M.o.t 

[tooleater]

http://www.imber.me.uk/keyfob.htm

Cheers Stemo, thanks for the info. mot next week, but Im gonna let Mr Serek deal with it..

[tooleater]

http://www.imber.me.uk/keyfob.htm

http://www.imber.me.uk/keyfob.htm

[TheBoy]

3 button fobs are easy to repair, though the replacement rubbers from Ching Chong Chinaland can be a bit hard, if yours is in a bad way.

Switches are large enough surface mount that they can be done with a standard iron with a fine tip.

Battery holder - if this has come away, my standard repair method is to remove it completely, and repair the broken leg by soldering a piece off the end of a resistor etc to what's left to make a new leg.  Solder this back to the board, and I usually add a bit of glue between the battery holder and the PCB to give it more mechanical strength.

Top case rubbers, if they are trashed, no option but to replace the top half of the case.


HTH