Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[beemerdevil]

deerrrrrrrrr   silly question, but just got my large window sticker 'OMEGAOWNERS.COM'....do they stick on outside of window??  and they are individual letters?? - thanks

[bob.dent]

Stick on the inside of window then peel off the transparent backing and that should leave the lettering in place on the window.

[JueV6]

don't try to follow the heated window lines on the back window. it just doesn't end up straight

I know from past experience

[beemerdevil]

yea..........thats what you would think eh!? - thats why i asked, cos mine doesnt have a transparent bit on, only 2 white strips of paper so i think i have a dodgy one cos there aint no way this can be stuck on window inside - only if you want it to read BACKWARDS - trust me, i have stuck stickers on before, and THIS ONE aint right - unless theres a trick to it........i dunno; bloody cheap skates !!! - in the bin it goes - WHERES THE SHOPKEEPER? yer stuckers are crap !!![smiley=angry.gif] [smiley=angry.gif]

[JonArgraig]

yea..........thats what you would think eh!? - thats why i asked, cos mine doesnt have a transparent bit on, only 2 white strips of paper so i think i have a dodgy one cos there aint no way this can be stuck on window inside - only if you want it to read BACKWARDS - trust me, i have stuck stickers on before, and THIS ONE aint right - unless theres a trick to it........i dunno; bloody cheap skates !!! - in the bin it goes - WHERES THE SHOPKEEPER? yer stuckers are crap !!![smiley=angry.gif] [smiley=angry.gif]

It should be a backing of thick glossy paper with the stickers on top with masking tape above to act as a carrier

[waspy]

I'm sat with my sticker infront of me (i bought it months ago ) You have two pieces of paper, one slightly thicker than the other. You peel the thicker one off to reveal the letters on the thinner piece which then stick on the inside of your glass, then you very carefully peel back the thinner paper to leave the letters on the glass.
Simple

[Timbuk]

Both sides are white, although one is thinner and semi transparent.

Peel the thicker side off so you can read the sticker normally.

Place in position, rub firmly with a cloth to remove any air bubbles and then carefully remove the thinner film leaving the letters in place, some letters may stick to this side and need a bit of help.

As i supply these to the forum i can asure you they come from a reputable sign writing company

[beemerdevil]

yea.......i fully understand what your saying mate.......but if i do that, the letters will ALL be back to front - they have been stuck on the wrong way !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!BACK TO FRONT - or to put it another way, UPSIDE DOWN !!!!!!!!!!!!!!!!

[Jimbob]

don't try to follow the heated window lines on the back window. it just doesn't end up straight

I know from past experience

Eh?

Thats the ONLY way i've found to get em striaght

[waspy]

You must have a dodgey one.  :-/ :-/ :-/

[beemerdevil]

yea.......i fully understand what your saying mate.......but if i do that, the letters will ALL be back to front - they have been stuck on the wrong way !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!BACK TO FRONT - or to put it another way, UPSIDE DOWN !!!!!!!!!!!!!!!!

Must have been a 'friday night' job

[beemerdevil]

Both sides are white, although one is thinner and semi transparent.

Peel the thicker side off so you can read the sticker normally.

Place in position, rub firmly with a cloth to remove any air bubbles and then carefully remove the thinner film leaving the letters in place, some letters may stick to this side and need a bit of help.

As i supply these to the forum i can asure you they come from a reputable sign writing company

must have been standing on his head or looking in a mirror when they made this one then !!!!!!!!!!!!

[Timbuk]

yea.......i fully understand what your saying mate.......but if i do that, the letters will ALL be back to front - they have been stuck on the wrong way !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!BACK TO FRONT - or to put it another way, UPSIDE DOWN !!!!!!!!!!!!!!!!

Must have been a 'friday night' job

well as i dont have any of the larger ones here i can only go on what your saying. We have only had one batch of these and im sure other members have fitted them ok :-/ I think TB needs to get one out and have a look

[Welung666]

I fitted mine the other day and they stick on the OUTSIDE

[Timbuk]

I fitted mine the other day and they stick on the OUTSIDE

Theres the answer then :-/  :-/