Did the cambelt and cam covers on Growlers car, all back together about 2pm, started it up and it run fine for around 10-15 minutes then was started knocking and missing.
Turned it off.
Back in bits again thinking the worst, the cambelt had not slipped and was still bang on.
Someone then mentioned has there being something left under the cam cover, so removed the cam cover... nothing wrong there.......
Put back together again.
Still did the same on start up.
One of the plug leads was bent in a 90 degree angle so we changed the leads and plugs.
Still the same on start up.
The Master was then consulted, who run through taking the brake servo pipe that goes to the plenum off, removing the "Y" breather to see if the car run any different...... when I put them back on again the car ran perfectly, so unless there was some shit in there I really don't know but what a nightmare of a job
