Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Thinking of buying a plastic welder.  (Read 899 times)

0 Members and 1 Guest are viewing this topic.

Martin_1962

  • Guest
Thinking of buying a plastic welder.
« on: 21 August 2010, 19:12:37 »
Are they any good?

Would anyone want any welding done?
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39777
    • ML350 TDM SmartRoadster
    • View Profile
Re: Thinking of buying a plastic welder.
« Reply #1 on: 21 August 2010, 20:12:02 »
Quote
Are they any good?

Would anyone want any welding done?

we used to have one where I was made redundant from. That worked OK, just practice. It was just a heater inside & you fed it with low pressure air so it produced very localised hot air. Then you need a suitable filler plastic rod.
Logged

PhilRich

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • A bit further North of the Back of Beyond!
  • Posts: 10338
    • Mk 2 Volvo V70
    • View Profile
Re: Thinking of buying a plastic welder.
« Reply #2 on: 21 August 2010, 21:05:34 »
Quote
Are they any good?

Would anyone want any welding done?
[/highlight]







Well my right knee 'gives way' now & again Martin, so I may need the odd tack here & there ;D ;D ;) :y
Logged
If it ain't broke keep fixing it 'til it is!

CaptainZok

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Bolton
  • Posts: 8093
  • Victim of Cyberbullying.
    • 3.2 MV6 Estate
    • View Profile
Re: Thinking of buying a plastic welder.
« Reply #3 on: 21 August 2010, 21:21:31 »
Ironing board needs extending now does it?
Logged
PM me for code reading/clearing
TuBy's new whipping boy.

tidla

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • solihull
  • Posts: 4097
    • View Profile
Re: Thinking of buying a plastic welder.
« Reply #4 on: 21 August 2010, 21:30:41 »
apparently she doesnt need any help thanks..

:P
Logged

Ken T

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Stockport
  • Posts: 2269
    • View Profile
Re: Thinking of buying a plastic welder.
« Reply #5 on: 21 August 2010, 21:46:12 »
Going back on topic .......

I use something similar to this 
http://cgi.ebay.co.uk/NEW-SMD-REWORK-DESOLDERING-STATION-SOLDERING-IRON-/380256134365?pt=UK_AudioElectronicsVideo_Video_TelevisionSetTopBoxes

Primarily for SMD rework, but the temp will go down to about 100C, so will melt plastic OK. I used it to stick my power sounder back together once I replaced the batteries, worked OK.

Ken
Logged
I used to be indecisive; now I'm not so sure...

tidla

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • solihull
  • Posts: 4097
    • View Profile
Re: Thinking of buying a plastic welder.
« Reply #6 on: 21 August 2010, 21:55:10 »
Quote
Going back on topic .......

I use something similar to this 
http://cgi.ebay.co.uk/NEW-SMD-REWORK-DESOLDERING-STATION-SOLDERING-IRON-/380256134365?pt=UK_AudioElectronicsVideo_Video_TelevisionSetTopBoxes

Primarily for SMD rework, but the temp will go down to about 100C, so will melt plastic OK. I used it to stick my power sounder back together once I replaced the batteries, worked OK.

Ken

cheers ken :y
Logged

feeutfo

  • Guest
Re: Thinking of buying a plastic welder.
« Reply #7 on: 21 August 2010, 21:56:43 »
Quote
apparently she doesnt need any help thanks..

:P
Oh i think she does....!         ;D
Logged

feeutfo

  • Guest
Re: Thinking of buying a plastic welder.
« Reply #8 on: 21 August 2010, 22:08:02 »
Quote
Going back on topic .......

I use something similar to this 
http://cgi.ebay.co.uk/NEW-SMD-REWORK-DESOLDERING-STATION-SOLDERING-IRON-/380256134365?pt=UK_AudioElectronicsVideo_Video_TelevisionSetTopBoxes

Primarily for SMD rework, but the temp will go down to about 100C, so will melt plastic OK. I used it to stick my power sounder back together once I replaced the batteries, worked OK.

Ken
Mmmm,nooooh....(I think)  the ones I've seen are far bigger and totally hand held, gas powered flame, or possibly soldering iron style, with a a beed of plastic fed in on a trigger. Main trick is matching the correct plastic beed to the part being welded, ok omega bumpers will be all the same to a point I would think, but matching flame heat, trigger speed and movement of the gun takes a bit of fiddling around iirc.

But on the other hand, the main application I witnessed was repairing bike fairings(not all of them mine  ::) ) where the manufacturers chopped and changed plastic types year on year and to achieve different colours I think, so it may be easier on one make of car...?

Anyway, Mr Imber, have we cracked a bumper per chance? 
Logged

Ken T

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Stockport
  • Posts: 2269
    • View Profile
Re: Thinking of buying a plastic welder.
« Reply #9 on: 21 August 2010, 22:33:06 »
You can draw an analogy with metal welding here. The hot air devices are like gas welding, what Chrisgixer described, feeding in the filler rod sounds like a Mig welder. Both techniques will work, although for fixing a crack that doesn't need filler the hot air might be better. Plus it would be handy for removing/replacing SMD components, as found in key fobs......

Ken
Logged
I used to be indecisive; now I'm not so sure...

feeutfo

  • Guest
Re: Thinking of buying a plastic welder.
« Reply #10 on: 21 August 2010, 22:41:30 »
Yeah, would depend on the application.....?
Logged

Martin_1962

  • Guest
Re: Thinking of buying a plastic welder.
« Reply #11 on: 21 August 2010, 22:52:53 »
Large split in the front panel of the caravan, this is Baileys fault not mine.

Was going to do MEK and ABS extrusions but Plastruct have gone styrene, and MEK is not easy to get anymore.

Found the plastic welding and thought hmmm.

Got a cracked A frame cover as well
Logged

feeutfo

  • Guest
Re: Thinking of buying a plastic welder.
« Reply #12 on: 21 August 2010, 23:07:09 »
Quote
Large split in the front panel of the caravan, this is Baileys fault not mine.

Was going to do MEK and ABS extrusions but Plastruct have gone styrene, and MEK is not easy to get anymore.

Found the plastic welding and thought hmmm.

Got a cracked A frame cover as well
For a caravan.....?  Blu tac? Wottle and dawb, twigs and bailing twine?.........drill holes and cable tie?.........
White(or baige) gaffer tape?
Logged

Debs.

  • Guest
Re: Thinking of buying a plastic welder.
« Reply #13 on: 22 August 2010, 08:43:59 »
 ::) Wouldn`t a "Plastic Welder" be a little like a "Chocolate Fireguard" :P

 ;).....;D.....:D
Logged

Auto Addict

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • North Birmingham
  • Posts: 13554
  • Back to Vx to keep TB happy
    • Astra K Elite ST
    • View Profile
Re: Thinking of buying a plastic welder.
« Reply #14 on: 22 August 2010, 13:09:19 »
Quote
Quote
Large split in the front panel of the caravan, this is Baileys fault not mine.

Was going to do MEK and ABS extrusions but Plastruct have gone styrene, and MEK is not easy to get anymore.

Found the plastic welding and thought hmmm.

Got a cracked A frame cover as well
For a caravan.....?  Blu tac? Wottle and dawb, twigs and bailing twine?.........drill holes and cable tie?.........
White(or baige) gaffer tape?

Ignore them Martin, they're only jealous :D
Logged
I like red cars
Pages: [1]   Go Up
« previous next »
 

Page created in 0.017 seconds with 17 queries.