News:

Welcome to OOF - the online resource for all things Vauxhall/Opel Omega-B

Main Menu

Newent 2010 Jobs List

Started by Loo-knee, 19 August 2010, 22:56:40

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

feeutfo

QuoteGot a 2nd set of bushes, so be good if we could get her's done too  please :y

Can get them both worthwile geometry checks afterwards then  :D
Is there a camp site near wim we could use ?  :D

Marks DTM Calib

Front Suspension/Steering check - Entwood (1 hour)
AC check - Andy B (1 hour)
Rear Bushes, springs and shocks - Gaffers (2 hours)
Wishbone check + tech 2 - Sethsmate (1 hour)
AC check - CaptainZ (1 hour)
Frontwheel bearing, cambelt, O2 sensor, front and rear pads - AA (4.5 hours)
Rear bushes x 2 + Tech 2 check - Jimbob (3 hours)
Front wishbones, droplinks and rear bushes - Broocie (3 hours)
Oil cooler re-seal - JohnM (3 hours)
Sump drop - JoshWyatt (2 hours)
Door lock solenoid - Bob Dent (1 hour)
Tech 2 check - Astroblaster (0.5 hours)
Steering check + Tech 2 - NeilMV6 (1 hour) (Make sure you bring your security pass)
Cambelt + water pump plus Tech 2 - MartinP (1.5 hours)

Optional
Exhaust manifold gasket - dad1uk (3 hours)

So plenty to do then!


Darth Loo-knee

Master i know your good but if you can do all that list on Saturday i will supply you with a bottle of firewater  ;D
Everything to do with Omega's. Breaking, Servicing from Cambelts to Oil Changes... Please Pm me for details...

Jimbob

Im more than happy to do the light stuff like tech2'ing to free up others  :y

dad1uk

QuoteMaster i know your good but if you can do all that list on Saturday i will supply you with a bottle of firewater  ;D

You don't call him the 'Master' for nothing Daz! ;)
best wishes
Simon.

feeutfo

Can do wishbones and rear bushes to take the load off, but i think The Boy may want his hubs changing, and i dont mean just wheel barings. so camber and toe may be affected, which will take some fiddling around.

feeutfo


Auto Addict

QuoteFront Suspension/Steering check - Entwood (1 hour)
AC check - Andy B (1 hour)
Rear Bushes, springs and shocks - Gaffers (2 hours)
Wishbone check + tech 2 - Sethsmate (1 hour)
AC check - CaptainZ (1 hour)
Frontwheel bearing, cambelt, O2 sensor, front and rear pads - AA (4.5 hours)
Rear bushes x 2 + Tech 2 check - Jimbob (3 hours)
Front wishbones, droplinks and rear bushes - Broocie (3 hours)
Oil cooler re-seal - JohnM (3 hours)
Sump drop - JoshWyatt (2 hours)
Door lock solenoid - Bob Dent (1 hour)
Tech 2 check - Astroblaster (0.5 hours)
Steering check + Tech 2 - NeilMV6 (1 hour) (Make sure you bring your security pass)
Cambelt + water pump plus Tech 2 - MartinP (1.5 hours)

Optional
Exhaust manifold gasket - dad1uk (3 hours)

So plenty to do then!


Mark, I think TB want's his front hubs replacing as well.
I like red cars

Marks DTM Calib

QuoteMaster i know your good but if you can do all that list on Saturday i will supply you with a bottle of firewater  ;D

You have so much to learn youth!

Its a case of getting the jobs done.....not a case of doing them all myself.

Delegation is the name of the game here  :y

Welung666

QuoteFront Suspension/Steering check - Entwood (1 hour)
AC check - Andy B (1 hour)
Rear Bushes, springs and shocks - Gaffers (2 hours)
Wishbone check + tech 2 - Sethsmate (1 hour)
AC check - CaptainZ (1 hour)
Frontwheel bearing, cambelt, O2 sensor, front and rear pads - AA (4.5 hours)
Rear bushes x 2 + Tech 2 check - Jimbob (3 hours)
Front wishbones, droplinks and rear bushes - Broocie (3 hours)
Oil cooler re-seal - JohnM (3 hours)
Sump drop - JoshWyatt (2 hours)
Door lock solenoid - Bob Dent (1 hour)
Tech 2 check - Astroblaster (0.5 hours)
Steering check + Tech 2 - NeilMV6 (1 hour) (Make sure you bring your security pass)
Cambelt + water pump plus Tech 2 - MartinP (1.5 hours)

Optional
Exhaust manifold gasket - dad1uk (3 hours)

So plenty to do then!


I make that 28.5 hours! Working it out at a discounted £50 an hour means a total of £1,425. Not bad for a weekends work ;)

I am only joking before anyone has heart failure! ;D ;D

As an aside I'll be passing either Saturday or Sunday, not sure which yet, but I intend on popping in for an hour and a cup of tea :y

hotel21

I am driving down on the Thursday and booked for WIM later Monday morning.

Happy to do brake discs and pads for others as well as Tech2.  Looking to confirm/advance my T2 apprenticeship by assistance from others more knowledgeable....   ;) 

hotel21

#71
As a slight aside, I brass necked it a bit earlier last week in a VX dealership whilst I was on my travels and managed to bag a pair of new/old stock gen VX wishbones (label pick date is 2004/2005!!) for 'a Good Price'...

As a result, have a pair of still wrapped Lemfoders from All German that I bought a few weeks ago.  Will put them in the car as well, just in case a suspension check on someones car (Entwood/Sethsmate/whoever??) shows up a set of duffers and they can be bought from me, if desired, at the price I paid.   :y

feeutfo

QuoteAs a slight aside, I brass necked it a bit earlier last week in a VX dealership whilst I was on my travels and managed to bag a pair of new/old stock gen VX wishbones (label pick date is 2004/2005!!) for 'a Good Price'...

As a result, have a pair of still wrapped Lemfoders from All German that I bought a few weeks ago.  Will put them in the car as well, just in case a suspension check on someones car (Entwood/Sethsmate/whoever??) shows up a set of duffers and they can be bought from me, if desired, at the price I paid.   :y
Do the bushes look the same in the vx v lemforder wishbones? I imagine they do? I also have a spare pair. :y

Welung666

QuoteAs an aside I'll be passing either Saturday or Sunday, not sure which yet, but I intend on popping in for an hour and a cup of tea :y

Just to confirm, it will be Saturday :y Looking forward to meeting you all ;)

Andy B

Is anyone taking a machine polisher for doing headlights?
Mine could doing if they are  ;)  ;)  :y