Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[henryd]

New exhaust fitted to the MV6 today and yes all the bolts on the front snapped all drilled out and new system on. Rear pipes are very close just before the back box, was not like that with the other system from Poland for the Elite. still I'll start her tomorrow and see if I get a rattle

The one I did today had the pipes pretty close together as well,came from Unipart stockist who had it all on the shelf ,exhaust came to £151 including some clamps

[cem_devecioglu]

for the clit


first cleared the space for turbo and tubular exhaust manifold



and then this one (turbo garret 2052)

flanges 310 , rest 304

[joff]

New exhaust fitted to the MV6 today and yes all the bolts on the front snapped all drilled out and new system on. Rear pipes are very close just before the back box, was not like that with the other system from Poland for the Elite. still I'll start her tomorrow and see if I get a rattle

The one I did today had the pipes pretty close together as well,came from Unipart stockist who had it all on the shelf ,exhaust came to £151 including some clamps

Nope under £100 fitted cat back from Poland

[TheBoy]

Removed the power sounder from the Battlebus. Found an ants nest behind the liner

[cem_devecioglu]

Removed the power sounder from the Battlebus. Found an ants nest behind the liner

     interestingly the last time I cleaned a friends engine bay there were some soil under the wipers covered with fungi and some plants   what the .....    when I asked him he had no idea how the soil accumulated there


ps: serious

[henryd]

New exhaust fitted to the MV6 today and yes all the bolts on the front snapped all drilled out and new system on. Rear pipes are very close just before the back box, was not like that with the other system from Poland for the Elite. still I'll start her tomorrow and see if I get a rattle

The one I did today had the pipes pretty close together as well,came from Unipart stockist who had it all on the shelf ,exhaust came to £151 including some clamps

Nope under £100 fitted cat back from Poland

Good price ,but I didn't know I needed it till this morning so price wasn't top of my priorities,just needed it quicksmart

[05omegav6]

Made the final connections for the lightbar... Have a couple of questions for a Traffic Officer... Will ask the first one to stop me

So far, the PNC checks haven't produced so much as a raised eyebrow...

[Taxi_Driver]

Yesterday, new rear tyre, as apparently it wasnt round! 

[joff]

Removed duff alternator on the 2.6 LPG saloon ( sod of a job with LPG fitted and the fact that some ass had put the top bolt in around the wrong way), only to find the water pump is leaking. So new pump and time for a cam belt kit as I don't know when the last one was fitted, and the fact that the chap I got it off talks out of his back side. Still can't say to much as I did not give a lot for it.

[aaronjb]

Spotted some rust. Serious looking rust. A big enough crusty crunchy patch on the sill that makes me not want to take the plastic sill cover off in case there's nothing left behind it.. 

[omega3000]

Spotted some rust. Serious looking rust. A big enough crusty crunchy patch on the sill that makes me not want to take the plastic sill cover off in case there's nothing left behind it.. 

Would that be at the rear of the sill ? Mine needs a patch too 

[Sir Tigger KC]

Spotted some rust. Serious looking rust. A big enough crusty crunchy patch on the sill that makes me not want to take the plastic sill cover off in case there's nothing left behind it.. 

Would that be at the rear of the sill ? Mine needs a patch too 

Jack it up and see what happens! 

[aaronjb]

Spotted some rust. Serious looking rust. A big enough crusty crunchy patch on the sill that makes me not want to take the plastic sill cover off in case there's nothing left behind it.. 

Would that be at the rear of the sill ? Mine needs a patch too 

About 3" in front of the B pillar..

[05omegav6]

Spotted some rust. Serious looking rust. A big enough crusty crunchy patch on the sill that makes me not want to take the plastic sill cover off in case there's nothing left behind it.. 

Would that be at the rear of the sill ? Mine needs a patch too 

About 3" in front of the B pillar..

Passenger side perchance

[aaronjb]

Nope, drivers.. I haven't looked at the other side.

*sticks head in sand*