Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[05omegav6]

Mine is passenger side, but nothing the plastic cannot hide

[kevinp58]

Fitted my Jetex s/s exhaust a really well made piece of kit just went together so easy  the only thing was the car had its original factory fitted exhaust and the barstid bolts all snapped at the cat end  that was after smothering them in wd40 and tapping them brushing the loose rust off then soaking them again for hours in wd again slowly undo a tad then back it back again to and through but still snapped but the exhaust is on and sounds really nice not loud and quiet when ticking over then when you bury the pedal it has a nice deep sound but not loud. 

[joff]

New water pump on the 2.6 and almost fitted new cam belt then the rain come, so hope tomorrow is better

[cem_devecioglu]

painted the winter wheels for omega


base color to give blue shade





final color silver





but painting them were a pain in the ar*e    it took 4.5 half hours to paint 2 with clear coat


painting them vertically easier.. for less dust and avoiding flow in the holes

[omega3000]

Nice job Cem  You sure like to paint much anything in your spare time 

[Magwheels]

Painting multi spoke wheels was always a royal pain!!!

Look worth it though, they look good.   

[tunnie]

Broken the Estate 

[TheBoy]

Not sure if the colour has come out too well in the pics, but looks a decent job there cem, so worth the effort

tunnie - did you manage to fix it?

[chrisgixer]

Re paint flow, I often wondered about keeping the part turning. Where possible?

[tunnie]

Not sure if the colour has come out too well in the pics, but looks a decent job there cem, so worth the effort

tunnie - did you manage to fix it?

No 

Big thanks to Josh for staying later than planned, but as per other thread/text it appears to be the loom 

Add into that ABS ECU replacement, we could be at the end of the road I think.

Option 1) Sell both get something like V70 Estate.
Option 2) Get a roof box for the 3.2, which is tempting as sod all is wrong with that car. Bar an aircon valve leak 

[chrisgixer]

Not sure if the colour has come out too well in the pics, but looks a decent job there cem, so worth the effort

tunnie - did you manage to fix it?

No 

Big thanks to Josh for staying later than planned, but as per other thread/text it appears to be the loom 

Add into that ABS ECU replacement, we could be at the end of the road I think.

Option 1) Sell both get something like V70 Estate.
Option 2) Get a roof box for the 3.2, which is tempting as sod all is wrong with that car. Bar an aircon valve leak 

For the sake of a bit of solder ? Pull yourself together lad

[brian36]

after having new wishbones,drop links and tie rods done with poly bushes took a drive to wim at chesham get full geo set up done. guys done great job and as good old marks dtm had loosened rear bits etc as seized it only cost £72 to get sorted. felt completely different on return trip.

[05omegav6]

It's a stressy process if you're new to it, but the results speak for themselves

Enjoy

[joff]

Got the cam belt finished, new air filter and put a pollen filter in as it did not have one changed the oil, and then could not get the oil filter off as the whole thing ( cap and body) is turning Grrrrrrrrrr, how the hell do you get it off now I do have a spare housing in the parts shed I think and a hammer in the garage

[cem_devecioglu]

Nice job Cem  You sure like to paint much anything in your spare time 

thanks Emd.. I paint whatever I catch


ps: in the last days I learned some new things about patches .. I'll share whenever I test them on a piece..