right ive managed to just about get a few pics but not as many as i wanted to get up so here goes the vids wouldnt encode at all for some strange reason
if ur radio is coded make sure u have the code or what ever because it will need removeing
this is what mine looked like b4 i removed it

remove the switchs witha screw driver both sides as u can see im haveing to hold the camera and i couldnt do it and gentle prise out the switch like so

now when u get to the hazard switch u have to remove the cap u will think u have broke it but u havent there is 2 tabs left and right of the white centre bit u have to push in to get it to move then gently pull out

ten remove all the knobs off the heater matrix and then it should look like this there is a screw under each one
then removeing the ashtray take out the ashray that removes to empty the ash then the screw at the back of the ashtray

now pull the ashtray out and then the face should come away then slide the plugs off the back of the facia push them down if u have tc u will have to remove this switch as well by priseing out the blanks first then the tc switch its self then remove the plug from the back of these then remove the plug at the back of the main fascia this should then remove the entire section of the centre console facia hope this helps plz add to this if i have forgoton something