Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Drivers seat airbag connector  (Read 540 times)

0 Members and 2 Guests are viewing this topic.

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24523
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Drivers seat airbag connector
« on: 23 July 2008, 13:55:13 »
As some of you are aware, ive been getting error 77 drivers side airbag resistance high errors.

To begin with cheapo tech2 cleared em no problem, but they started getting more and more frequent, and became unclearable.

Real tech2 along with Mark and Jaime traced the fault to the connector in the seat back.

If wiggled would change the resistance, and the lamp could then be turned out.

Time before last, Disconencted the battery, connector on and off a few times, reassembled and all was well.

Until yesterday :(  turned 120000 on the clock and airbag light came back on.

Wiggled the connector, light off, start the car again, light back on.

So

We know what the problem is, but any suggestions on a slightly more permanent fix?

Cheers
Logged

markey mark

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • SLady bitshorpe north lincs
  • Posts: 4236
  • banned for repeatedly reneaging on deals.
    • View Profile
Re: Drivers seat airbag connector
« Reply #1 on: 23 July 2008, 14:55:42 »
cut the plug off and solder the wires together !! :y
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33985
  • Git!
    • View Profile
Re: Drivers seat airbag connector
« Reply #2 on: 23 July 2008, 14:57:06 »
Quote
cut the plug off and solder the wires together !! :y

Its the early type where the plug is integral to the airbag......not to sure about getting heat into that bit!
Logged

markey mark

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • SLady bitshorpe north lincs
  • Posts: 4236
  • banned for repeatedly reneaging on deals.
    • View Profile
Re: Drivers seat airbag connector
« Reply #3 on: 23 July 2008, 14:58:06 »
Quote
Quote
cut the plug off and solder the wires together !! :y

Its the early type where the plug is integral to the airbag......not to sure about getting heat into that bit!

mabye not then wouldnt want it going off in your face !! :o :o
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.009 seconds with 17 queries.