Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[AlexMitton.co.uk]

Morning OOF,

My Omega is leaking Automatic Transmission Fluid due to a Bung/Seal which has gone missing?

Does anybody know the proper name for it? Because I cant find it anywhere?

Note to Mod: Note sure to where to post this.

Thanks alot,
Alex

[unlucky alf]

the best thing to do is first check the filler hole has got its plug in [on edge of large sump drivers side], if thats in situ then id give the g/box a good clean, top it up [follow "how to guide"] then take it for a run & see where the leak is coming from.

[dbug]

If the rubber bung you mean is the one underneath on the bell housing, then atf leakage from here likely caused by g/box front seal knackered - a gearbox out job

[AlexMitton.co.uk]

I've had it up on the lift in my mates garage.

I can see a whole where something goes, and oil inside it.

[Andy H]

A photo would help to identify this mysterious bung (or a clearer description)

[Andy B]

I've had it up on the lift in my mates garage.

I can see a whole where something goes, and oil inside it.

I'm with dbug on this one. 

[AlexMitton.co.uk]

A photo would help to identify this mysterious bung (or a clearer description)

OK, I'll get it back on the lift and take a photo.

Cheers

[dbug]

I've had it up on the lift in my mates garage.

I can see a whole where something goes, and oil inside it.

I'm with dbug on this one. 

Thanx mate - been there, done it!!  Put new seal on, still leaked now swapped box and ok!!