Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Code 59 ......  (Read 604 times)

0 Members and 1 Guest are viewing this topic.

I_want_an_Omega

  • Guest
Code 59 ......
« on: 28 May 2010, 10:41:33 »
Hi,

I'm getting a "fast flickering" ECU light.

Turns out its a Code 59 - which is:

59   Intake Manifold Valve 1 Voltage Low

I think this is the rear multiram control valve - but any ideas?

It's only started doing it today and that was after I opened her up after a cold start. The light now comes on as soon as the car is started & its defo flickering - with the light being on 95% on and 5% off.

I've had the plenum off to the the cam covers so suspect that I might have disturbed something.

Thanks
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107031
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Code 59 ......
« Reply #1 on: 28 May 2010, 11:51:20 »
Valve 1 is the rear one, correct.

If you've had plenum off, its an easy one to forget to plug back in.  I'm sure we all have at some point  :-[
Logged
Grumpy old man

Omegafantasy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Oslo, Norway
  • Posts: 178
    • View Profile
Re: Code 59 ......
« Reply #2 on: 28 May 2010, 12:01:18 »
A voltage low error would be a short circuit as far as I know. If it was disconnected he would get a "voltage high" error.

Please correct me if I'm wrong, but that's my experience and logic so far.
Logged
1995 Omega 2.6 V6 Estate ("fresh" engine) Drives like a 2-litre. Grr! Gettin' dusted by a 1.8 auto Cav..
1991 Omega 3000-24v (major rust job)
(Interested in buying Vauxhall emblems/grille for my V6)

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107031
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Code 59 ......
« Reply #3 on: 28 May 2010, 12:05:42 »
Quote
A voltage low error would be a short circuit as far as I know. If it was disconnected he would get a "voltage high" error.

Please correct me if I'm wrong, but that's my experience and logic so far.
Not necessarily, but would need to check it...
Logged
Grumpy old man

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36417
    • Jaguar XE 25t, Westfield
    • View Profile
Re: Code 59 ......
« Reply #4 on: 28 May 2010, 12:22:53 »
Quote
Quote
A voltage low error would be a short circuit as far as I know. If it was disconnected he would get a "voltage high" error.

Please correct me if I'm wrong, but that's my experience and logic so far.
Not necessarily, but would need to check it...

I think the low side of the solenoids are switched by the ECU so voltage low = disconnected.

(ECU expects 12v on the line, grounds it to energise solenoid).

Kevin
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

I_want_an_Omega

  • Guest
Re: Code 59 ......
« Reply #5 on: 28 May 2010, 12:44:24 »
Thanks guys, will take a look & let you know ,,,,,,,,,,,,
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.021 seconds with 17 queries.