Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1] 2  All   Go Down

Author Topic: Cambelt change on 2.2  (Read 1665 times)

0 Members and 1 Guest are viewing this topic.

Trothy

  • Newbie
  • *
  • Offline Offline
  • Warrington
  • Posts: 27
    • View Profile
Cambelt change on 2.2
« on: 02 July 2010, 12:11:19 »
Hi there, just bought a 2001 Omega saloon with 69000miles on the clock and as there is no history of when the cambelt has been changed I've ordered a cambelt kit and water pump.

I'm a little apprehensive as I've never done work on my own car before.

Is this a pretty simple job?  I've ordered the dvd from OOF.

If I struggle is there anyone in the warrington area who could give me a hand or wouldn't mind doing the job for a small fee? 

Cheers,

Allan
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37625
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Cambelt change on 2.2
« Reply #1 on: 02 July 2010, 12:19:25 »
Elite Pete or Darth Loo Knee are not far from you, might be worth dropping them a PM  :y
Logged

PhilRich

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • A bit further North of the Back of Beyond!
  • Posts: 10338
    • Mk 2 Volvo V70
    • View Profile
Re: Cambelt change on 2.2
« Reply #2 on: 02 July 2010, 12:32:26 »
Alan, you shouldn't have any probs especially with the help of the DVD. It (the dvd) is a bit amateurish in places, but non the less very informative. I had never attempted anything so  'technical' for years, & i'm not that mechanically minded so you should manage OK. You must get the cam locking tool though! it's only about £6-7, made of blue high impact plastic by Draper I believe, & readily available, I bought mine from ebay. Any help required, just give me a PM or ask for help in 'General Help'.  :y
Logged
If it ain't broke keep fixing it 'til it is!

Trothy

  • Newbie
  • *
  • Offline Offline
  • Warrington
  • Posts: 27
    • View Profile
Re: Cambelt change on 2.2
« Reply #3 on: 02 July 2010, 13:04:38 »
Thanks, I think I'll give it a go once the locking kit and parts turn up, if I get stuck no doubt I'll be bumping this topic up!
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37625
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Cambelt change on 2.2
« Reply #4 on: 02 July 2010, 13:14:38 »
Quote
Thanks, I think I'll give it a go once the locking kit and parts turn up, if I get stuck no doubt I'll be bumping this topic up!

Not really a kit on the 2.2's its just a locking wedge!

Hardest bit i found is getting the new belt on, its very tight getting it over the tensioner
Logged

stuthespread

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • stevenage,herts
  • Posts: 191
  • no spring chicken
    • View Profile
Re: Cambelt change on 2.2
« Reply #5 on: 02 July 2010, 19:09:09 »
i just bought a 2.2 where i didn't know the history,it might be a good idea to physically check the belt,tensioners and especially the water pump before forking out for the kit etc.I found on mine that it had all been done very recently ie:water pump and tensioners are all as good as brand new,then i found out from the guy i got it from that it was done 5k ago,you never know...........
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37625
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Cambelt change on 2.2
« Reply #6 on: 02 July 2010, 20:00:14 »
Quote
i just bought a 2.2 where i didn't know the history,it might be a good idea to physically check the belt,tensioners and especially the water pump before forking out for the kit etc.I found on mine that it had all been done very recently ie:water pump and tensioners are all as good as brand new,then i found out from the guy i got it from that it was done 5k ago,you never know...........

Utterly pointless in reality, a tensioner will look the same at 1k or 50k. You won't know until you take it off and spin it freely. If history is unknown, change it regardless.  :y
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: Cambelt change on 2.2
« Reply #7 on: 02 July 2010, 20:02:37 »
Cost of a cambelt change... £200 ??

Cost of a tensioner failure - New engine ?? £1000 ???

simples

40K or 4 years and if you don't know .. change it.
Logged

stuthespread

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • stevenage,herts
  • Posts: 191
  • no spring chicken
    • View Profile
Re: Cambelt change on 2.2
« Reply #8 on: 02 July 2010, 20:17:41 »
still no guarentee a new kit won't fail prematurely,it does happen.
Logged

stuthespread

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • stevenage,herts
  • Posts: 191
  • no spring chicken
    • View Profile
Re: Cambelt change on 2.2
« Reply #9 on: 02 July 2010, 20:20:52 »
and i don't think anyone on this forum would have to pay £1000 for a new engine either,just my opinion.
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37625
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Cambelt change on 2.2
« Reply #10 on: 02 July 2010, 20:23:10 »
Quote
still no guarentee a new kit won't fail prematurely,it does happen.

No, but much better odds that it survives longer than current one!
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37625
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Cambelt change on 2.2
« Reply #11 on: 02 July 2010, 20:24:49 »
Quote
and i don't think anyone on this forum would have to pay £1000 for a new engine either,just my opinion.

Why say that? Some of the regulars who knows engines inside out won't but there are members here who have paid mroe than that to get their car on the road again!
Logged

stuthespread

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • stevenage,herts
  • Posts: 191
  • no spring chicken
    • View Profile
Re: Cambelt change on 2.2
« Reply #12 on: 02 July 2010, 20:33:31 »
all i'm saying is that any member of this forum that has problems with their car can rely on members like yourself and numerous others to come up with solutions to their problems and spare parts etc at a fraction of the cost of going to a dealer,lets face it you can buy a very nice,well looked after omega on this forum for that sort of money,didn't mean any offence by it.
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: Cambelt change on 2.2
« Reply #13 on: 02 July 2010, 22:18:56 »
If you were to take a car to a garage after having had a cambelt failure and ask them to fix it .. I doubt the bill would be less than £1000 .. the reason for my comment.

It's one thing Daz, Pete etc driving somewhere to do a cambelt change .. its a tad different then going to the same place to do a complete engine rebuild !!!

Not every member has the time, tools or ability to do a complete engine rebuild, and some will be geographicaly situated that they will not be able to get Forum help.

Logged

CaptainZok

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Bolton
  • Posts: 8093
  • Victim of Cyberbullying.
    • 3.2 MV6 Estate
    • View Profile
Re: Cambelt change on 2.2
« Reply #14 on: 02 July 2010, 22:27:38 »
You may save a ton or so by not changing the belt on schedule, you may blow a grand on a top end rebuild if it goes so as Clint said "Do you feel lucky? Well do you?"
Logged
PM me for code reading/clearing
TuBy's new whipping boy.
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.028 seconds with 17 queries.