Topic: po141 code (Read 626 times)

unlucky mark mv6 · « **on:** 19 February 2011, 22:21:48 »

As i have code po141,it says sensor 2 on bank 1 heater circuit malfunction,am i right in saying that the lamba is knackered,or is it something else,possibly vacuum leak,faulty injector etc,or even blowing manifold. :-/

Entwood · « **Reply #1 on:** 19 February 2011, 22:24:43 »

Quote

As i have code po141,it says sensor 2 on bank 1 heater circuit malfunction,am i right in saying that the lamba is knackered,or is it something else,possibly vacuum leak,faulty injector etc,or even blowing manifold. :-/

It is sensing an open circuit in the heater line ... all lambda probes are heated.

Either ... heater has failed = new lambda sensor or a wire is off/damaged

unlucky mark mv6 · « **Reply #2 on:** 19 February 2011, 22:26:49 »

Thanks entwood,will check it out tomoz then.

unlucky mark mv6 · « **Reply #3 on:** 19 February 2011, 22:32:15 »

Also where is this sensor located,would it be the bottom one on the drivers side.

RobG · « **Reply #4 on:** 19 February 2011, 22:33:10 »

Quote

Also where is this sensor located,would it be the bottom one on the drivers side.

unlucky mark mv6 · « **Reply #5 on:** 19 February 2011, 23:21:51 »

Thanks rob

News:

Author Topic: po141 code (Read 626 times)

unlucky mark mv6

po141 code

Entwood

Re: po141 code

unlucky mark mv6

Re: po141 code

unlucky mark mv6

Re: po141 code

RobG

Re: po141 code

unlucky mark mv6

Re: po141 code