Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Bonnet release cable broken.  (Read 1436 times)

0 Members and 1 Guest are viewing this topic.

Shelby

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Sleaford, Lincolnshire
  • Posts: 332
    • View Profile
Bonnet release cable broken.
« on: 03 April 2011, 09:24:53 »
Is there an easy way to open the bonnet with a broken bonnet release cable?

It went yesterday evening and having had a look at it this morning it is still attached at the handle in the drivers footwell, so can only assume either the cable itself has broken somewhere or come off at the bonnet end.  However, having never had to deal with this particular problem on any car before I am unsure how to go about it.

Any hints, tips, thoughts or ideas welcome.  I suspect it would be reasonably easy to do as long as you can get the bonnet open first, however I have no idea where to start to do that!

Thanks
« Last Edit: 03 April 2011, 10:32:24 by Tanthalas »
Logged

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24525
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: Bonnet release cable broken.
« Reply #1 on: 03 April 2011, 10:32:35 »
I think this will involve smashing a hole in the grille sorry.

Not something Ive had to sort though.
Logged

Brikhead

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • West-Mids.
  • Posts: 1540
  • Sleeping. Do not disturb.
    • 2003 chitroen Saxo
    • View Profile
Re: Bonnet release cable broken.
« Reply #2 on: 03 April 2011, 11:23:05 »
Are you sure it's broken? Get someone to push down on the bonnet as you operate the lever in the car.

If you do end up having to smash the grill then I have a mini face lift grill for sale...
Logged

chrisdb

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Chesterfield
  • Posts: 364
    • View Profile
Re: Bonnet release cable broken.
« Reply #3 on: 03 April 2011, 11:25:46 »
The only way I have found is with the front grille removed (or if you cut a hole in it). You can get your fingers on the release lever and pull it to the side to release the bonnet. On mine I had to also push down on the bonnet at the same time to release some pressure.
Logged
TC Card, will buy parts for members near by. V6 Camshaft locking kit can rent out to members at club rates.

Shelby

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Sleaford, Lincolnshire
  • Posts: 332
    • View Profile
Re: Bonnet release cable broken.
« Reply #4 on: 03 April 2011, 11:51:44 »
 :(  Not really the answer I was looking for haha, but if thats the case I will have to look at that.

Ill give it a go with someone pushing down on the bonnet etc and see what I can do.

Thanks
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39771
    • ML350 TDM SmartRoadster
    • View Profile
Re: Bonnet release cable broken.
« Reply #5 on: 03 April 2011, 12:05:11 »
Quote
:(  Not really the answer I was looking for haha, but if thats the case I will have to look at that.

Ill give it a go with someone pushing down on the bonnet etc and see what I can do.

Thanks

It's unusual for the cable to break, what normally happens is that the clamp on the slam pannel (under the plastic trim) slackens its grip on the outer sleeve of the cable.  ;)
Logged

Shelby

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Sleaford, Lincolnshire
  • Posts: 332
    • View Profile
Re: Bonnet release cable broken.
« Reply #6 on: 03 April 2011, 14:38:12 »
Problem sorted, wasn't the cable after all, even though it wasn't working at all when I originally posted.

I got my daughter to try the cable as I pushed down on the bonnet, however when I first pushed it down it gave an audible click and then the release seems to work fine.  So it would appear that it hadn't actually clamped down closed correctly (or something like that) even through the bonnet appeared to be closed and wouldn't.

Thanks for the replies, it's something I will certainly remember for the future in the event of something similar happening.
Logged

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24525
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: Bonnet release cable broken.
« Reply #7 on: 03 April 2011, 15:01:40 »
well done, this may be of use then...

http://www.omegaowners.com/forum/YaBB.pl?num=1256423143
Logged

jerry

  • Omega Knight
  • *****
  • Offline Offline
  • 0
  • Posts: 1314
    • View Profile
Re: Bonnet release cable broken.
« Reply #8 on: 03 April 2011, 23:23:15 »
certainly a pain when the cable gets slack! I did mine following the link last year but obviously not well enough ;D :-[ as it still happens every now and again, and always at a time when 1) I really do need to get the bonnet up and 2) my better half -or anyone else for that matter-isnt about to help me and push down as I pull the release lever. Be ok if I had really long arms ;D
Logged

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24525
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: Bonnet release cable broken.
« Reply #9 on: 04 April 2011, 07:57:51 »
If you still have problems and the cable is ok...could well be the spring is bent from 'over pulling', or worn from use.

About £3 for a new spring, and we are waiting on a how2 being produced.
Logged

Brikhead

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • West-Mids.
  • Posts: 1540
  • Sleeping. Do not disturb.
    • 2003 chitroen Saxo
    • View Profile
Re: Bonnet release cable broken.
« Reply #10 on: 04 April 2011, 08:52:42 »
Quote
..help me and push down as I pull the release lever. Be ok if I had really long arms ;D

One of my old cars used to be the same, I could get it open by pulling the lever in the car and reaching through the open door to smack the bonnet at the same time.
Logged

Brikhead

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • West-Mids.
  • Posts: 1540
  • Sleeping. Do not disturb.
    • 2003 chitroen Saxo
    • View Profile
Re: Bonnet release cable broken.
« Reply #11 on: 04 April 2011, 08:55:17 »
Quote
It's unusual for the cable to break, what normally happens is that the clamp on the slam pannel (under the plastic trim) slackens its grip on the outer sleeve of the cable.  ;)

Are you sure? I've sold two cable/lever assemblies so far...
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39771
    • ML350 TDM SmartRoadster
    • View Profile
Re: Bonnet release cable broken.
« Reply #12 on: 04 April 2011, 09:20:49 »
Quote
Quote
It's unusual for the cable to break, what normally happens is that the clamp on the slam pannel (under the plastic trim) slackens its grip on the outer sleeve of the cable.  ;)

Are you sure? I've sold two cable/lever assemblies so far...

because the cable or the handle had broken? Or it could be because someone assumed the cable had broken & bought yours before they'd looked? In 30+ yrs of car ownership I've never had a bonnet release cable break ....  :-/ ;) :y
Logged

Shelby

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Sleaford, Lincolnshire
  • Posts: 332
    • View Profile
Re: Bonnet release cable broken.
« Reply #13 on: 04 April 2011, 09:48:46 »
Ill have a look a look at it and possibly adjusting a bit this weekend.
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.