Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Mis-firing under load  (Read 1279 times)

0 Members and 1 Guest are viewing this topic.

Robbo_cdx

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • East Mids nr Snottingham
  • Posts: 15
    • View Profile
Mis-firing under load
« on: 15 September 2011, 23:42:37 »
Evening,

Last one for tonight, honest  :)

My car is missing under acceleration. It's ok when cruising at a steady speed but struggles to  accelerate. I thought it was possibly the plugs, when I changed them the plug recesses were full of oil.

I see from other threads this is not unheard of on the V6 and is the rocker box gasket. I'm guessing this is the same on the lowly 2.2?

Would this oil cause a misfire? I can't honestly sav I know if oil conducts electricity  :-/

Cheers

Robbo
Logged

albitz

  • Guest
Re: Mis-firing under load
« Reply #1 on: 15 September 2011, 23:43:51 »
Coilpack fried probably. ;)
Logged

The Red Baron

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • burton on trent.staffs
  • Posts: 6178
  • 3.0mv6 sal/3.0elite lpg/2.2dti estate
    • 2000 chipped mv6 3.0l
    • View Profile
Re: Mis-firing under load
« Reply #2 on: 15 September 2011, 23:44:30 »
yes, oil in the wells will cause a missfire, it will bugger the leads & eventually the diss pack. new gaskets required.  :y
Logged

vauxhall & halfords trade cards.v6 cam locking kit.<local only.

ndmv6

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • huddersfield
  • Posts: 147
    • 2001 2.2 auto cd
    • View Profile
Re: Mis-firing under load
« Reply #3 on: 15 September 2011, 23:45:51 »
hot oil fries the rubber sleeves and  coil pack,then cause poor starting and slight misfire under load..feels held back ?
Logged

Robbo_cdx

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • East Mids nr Snottingham
  • Posts: 15
    • View Profile
Re: Mis-firing under load
« Reply #4 on: 15 September 2011, 23:55:52 »
Quote
hot oil fries the rubber sleeves and  coil pack,then cause poor starting and slight misfire under load..feels held back ?

Thats absolutely it, almost feels like the hand brake is on.
New gasket at the weekend then and hope the coil packs are ok.

Thanks all  :)
Logged

The Red Baron

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • burton on trent.staffs
  • Posts: 6178
  • 3.0mv6 sal/3.0elite lpg/2.2dti estate
    • 2000 chipped mv6 3.0l
    • View Profile
Re: Mis-firing under load
« Reply #5 on: 15 September 2011, 23:57:37 »
clean all the oil from the wells too. dont know if it needs breathers cleaning out also. not too good with the 4 pots.
Logged

vauxhall & halfords trade cards.v6 cam locking kit.<local only.

ndmv6

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • huddersfield
  • Posts: 147
    • 2001 2.2 auto cd
    • View Profile
Re: Mis-firing under load
« Reply #6 on: 16 September 2011, 00:03:57 »
may be worth buying a small plastic syringe with a short length of pipe attached to try and get most of the oil out before you take the plugs out to clean them..oil dropping into the pots really upsets the lambda sensors and that can lead to no end of trouble and cost, once the engine is fired up again..
Logged

Vamps

  • Offline Offline
  • Gender: Male
  • Bishop Middleham, Co Durham.
  • Posts: 24708
  • Flying Tonight, so Be Prepared.
    • Mig 2.6CDX and 2.2 Honda
    • View Profile
Re: Mis-firing under load
« Reply #7 on: 16 September 2011, 00:11:10 »
Coil pack change is a 5 minute job..... :y
Logged

I_want_an_Omega

  • Guest
Re: Mis-firing under load
« Reply #8 on: 18 September 2011, 17:02:20 »
Quote
Coil pack change is a 5 minute job..... :y

On the V6 the only aspect of this to take 5 mins is the application of sticking plasters afterwards   :-[
Logged

Robbo_cdx

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • East Mids nr Snottingham
  • Posts: 15
    • View Profile
Re: Mis-firing under load
« Reply #9 on: 19 September 2011, 23:07:11 »
Well in between getting pissed on ( I really hate this countries weather  >:( ) I replaced the cam cover gasket and o rings. It was obvious that the cover had been off before by the 2 pounds of gobbo all over the shop. What a mess!! ::)

Cleaned all the plug wells and coil pack. Put it all back together and.... Bingo!! No more missing, starts better too. Still a bit fluffy (technical term that) when cold but miles better.

However, it still feels a bit flat. Is it still possible that there could be an issue with the coil pack or is my right foot just not heavy enough?

Thanks

Robbo.
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: Mis-firing under load
« Reply #10 on: 19 September 2011, 23:10:07 »
Quote
Well in between getting pissed on ( I really hate this countries weather  >:( ) I replaced the cam cover gasket and o rings. It was obvious that the cover had been off before by the 2 pounds of gobbo all over the shop. What a mess!! ::)

Cleaned all the plug wells and coil pack. Put it all back together and.... Bingo!! No more missing, starts better too. Still a bit fluffy (technical term that) when cold but miles better.

However, it still feels a bit flat. Is it still possible that there could be an issue with the coil pack or is my right foot just not heavy enough?

Thanks

Robbo.
After all that did you clean the breathers and throttle body :question
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Robbo_cdx

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • East Mids nr Snottingham
  • Posts: 15
    • View Profile
Re: Mis-firing under load
« Reply #11 on: 19 September 2011, 23:25:59 »
Quote
Quote
Well in between getting pissed on ( I really hate this countries weather  >:( ) I replaced the cam cover gasket and o rings. It was obvious that the cover had been off before by the 2 pounds of gobbo all over the shop. What a mess!! ::)

Cleaned all the plug wells and coil pack. Put it all back together and.... Bingo!! No more missing, starts better too. Still a bit fluffy (technical term that) when cold but miles better.

However, it still feels a bit flat. Is it still possible that there could be an issue with the coil pack or is my right foot just not heavy enough?

Thanks

Robbo.
After all that did you clean the breathers and throttle body :question

Throttle body? Nobody said anything about a throttle body?  :'(

Checked the breather pipes were clear though  :)

I'm guessing it's out with the spanners again this weekend then.  :)
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: Mis-firing under load
« Reply #12 on: 19 September 2011, 23:26:43 »
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Robbo_cdx

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • East Mids nr Snottingham
  • Posts: 15
    • View Profile
Re: Mis-firing under load
« Reply #13 on: 19 September 2011, 23:29:19 »
Excellent, thanks for that  :)

As a matter of interest, what is the frequency for this job?
Every 10K,20K or just as needed?

Thanks.
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.019 seconds with 17 queries.