Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Jim]

Hello,
Right I'm a little confused, I when back to the scappie's today and removed the brake pedal switch for the cruise control and it a 2 pin switch (picture below), Now if I need a four pin switch to make the cruise control switch off when I brake, how come the car I removed the whole crusie control system from (a 3.0 elite 1997) only has a 2 pin switch on the brake pedal, Can anyone help :-/

[PaulW]

Mine was the same when I just did mine, has cruise fitted but only a 2-pin brake switch

Checked through the service history though, and in 2002 apparently VX replaced the brake switch due to some eronious failure, and from what I gather they fitted the wrong switch...

You need VX p/n 9149766        047F05 SWITCH-STOP L

Costs £11.77+VAT on TC

[Jim]

Mine was the same when I just did mine, has cruise fitted but only a 2-pin brake switch

Checked through the service history though, and in 2002 apparently VX replaced the brake switch due to some eronious failure, and from what I gather they fitted the wrong switch...

You need VX p/n 9149766        047F05 SWITCH-STOP L

Costs £11.77+VAT on TC

Cheers Mate, I understand I need a 4 pin switch but it was just the fact that I removed the full cruise control kit from the same car and the switch which was fitted to that was the 2 pin switch and that's where the confusion was coming from, the car I removed it from was a 1998 elite 3.0 v6

[ffcgary1]

Jim try the cruise with the 2 pin switch that is in the car now. if it does not work  fit a 4 pin in it's place then try. mine worked with a 2 pin .

[Jim]

Jim try the cruise with the 2 pin switch that is in the car now. if it does not work  fit a 4 pin in it's place then try. mine worked with a 2 pin .

I'II give it a go in the morning and let everyone if it works or not with a 2 pin switch

[TheBoy]

was the donor a manual?