Topic: Key Fob with Flat Battery (Read 4385 times)

Jimbob · « **Reply #15 on:** 05 July 2009, 16:18:44 »

Worcestor i think

bazzer · « **Reply #16 on:** 05 July 2009, 17:05:15 »

Hi all

. Can I just add my solution from the same problem I had? It may help you Charlies Dad. My fob stopped working and I thought it was a flat battery. New battery no good. So not problem. As you say, battery holder inside fob not fixed to pcb, but connections all appeared okay. Today I bought a new battery just to make sure. Before replacing battery I pulled the 3 pronged battery connectors up to 90 degrees, replaced battery now fob works fine. It was just a poor terminal connection after all

. Icing on cake....did not need to resync fob with car!

Charlies Dad · « **Reply #17 on:** 05 July 2009, 20:08:56 »

will give it a go - fingers crossed

Martin_1962 · « **Reply #18 on:** 08 July 2009, 21:15:39 »

Sounds like the battery holder os broken - I have a nice strong repair for them - or if too knackered a few spares kept from flip conversions - 1 flip conversion = 1 MAF if they accept my offer

Charlies Dad · « **Reply #19 on:** 09 July 2009, 09:11:26 »

yeah might need it how much is the repair ?

News:

Author Topic: Key Fob with Flat Battery (Read 4385 times)

Jimbob

Re: Key Fob with Flat Battery

bazzer

Re: Key Fob with Flat Battery

Charlies Dad

Re: Key Fob with Flat Battery

Martin_1962

Re: Key Fob with Flat Battery

Charlies Dad

Re: Key Fob with Flat Battery