Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[helen]

Hi there, i've been silly and tried to open my front passenger window when it was frozen and the control arm came off, i repair the clip bits and i managed to reconnect the window, now when i close it it come back open about 3 inches and i have to on/off the switch to close it . also when i lock my door with the key and i turn fully  the window comes down a few inches and i have to unlock/lock to close it fully. i have tried to program the window as said in the manual but it still does it, any suggestions welcome. thankyou helen.

[rustym95]

try this may work, disconect the battery for about 10-20min then reconect should rest. if not there is a pressure switch in the window unit may be off set,

[helen]

Hi rustym95, thanks for the reply, i'll give that a go when i get time and i'll let you know how i get on,sounds better than a four pound hammer ? helen.

[peter19730]

sounds possibly like the pressure sensor but try disconnecting the battery for about 20 mins first to reset the system

[rustym95]

have you sorted it out yet? helen

[helen]

Hi rustym95, yes i have thanks, disconnected the battery for 15-20 minutes then reconnected and programed them in and they worked perfectly. thankyou for your help and thanks for the other replies, great forum. helen.

[rustym95]

it's ok gald to help

[Marks DTM Calib]

There is no pressure sesnor on the window setup.....but a power off will reset the motor control module

[rustym95]

There is no pressure sesnor on the window setup.....but a power off will reset the motor control module

if not why, if I push the button the window gose up, it stops if i hold the window and gose down 2 - 3 inches,.

[Dave DND]

There is no pressure sesnor on the window setup.....but a power off will reset the motor control module

if not why, if I push the button the window gose up, it stops if i hold the window and gose down 2 - 3 inches,.

Most windows have a current sensing circuit as part of the electronic control box - if the window gets stuck, the current to the motor goes up, and this is then sensed by the circuits and the windows lowered a little to allow whatever was trapped to become free.

Its not a physical sensor or switch though.

 

[Marks DTM Calib]

There is no pressure sesnor on the window setup.....but a power off will reset the motor control module

if not why, if I push the button the window gose up, it stops if i hold the window and gose down 2 - 3 inches,.

Most windows have a current sensing circuit as part of the electronic control box - if the window gets stuck, the current to the motor goes up, and this is then sensed by the circuits and the windows lowered a little to allow whatever was trapped to become free.

Its not a physical sensor or switch though.

 

Correct 

[unlucky mark mv6]

There is no pressure sesnor on the window setup.....but a power off will reset the motor control module

if not why, if I push the button the window gose up, it stops if i hold the window and gose down 2 - 3 inches,.

Most windows have a current sensing circuit as part of the electronic control box - if the window gets stuck, the current to the motor goes up, and this is then sensed by the circuits and the windows lowered a little to allow whatever was trapped to become free.

Its not a physical sensor or switch though.

 

Very clever bloke you are dave,im jealous.