Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[omega3000]

This is the worst one ...best shot i could get cos of the shine back 

 
bad news.. too long,wide and deep (lower part).. not suitable for a newbie hand.. if you try polishing although the upper part
may give some reult , lower part requires deep work which you may end up with a dull paint without laquer..
 
mask the scratch area and let it sprayed by a professional..

Ooh no can do that ...professional paint shop will cost too much and no doubt they will want to do the whole panel  , ill have a go myself ....it has gone down to the base coat 

[omega3000]

http://www.ehow.com/video_3378_fix-scratch-car.html
 
++ and last step use laquer..

I was waiting for the last bit 

[cem_devecioglu]

This is the worst one ...best shot i could get cos of the shine back 

 
bad news.. too long,wide and deep (lower part).. not suitable for a newbie hand.. if you try polishing although the upper part
may give some reult , lower part requires deep work which you may end up with a dull paint without laquer..
 
mask the scratch area and let it sprayed by a professional..

Ooh no can do that ...professional paint shop will cost too much and no doubt they will want to do the whole panel  , ill have a go myself ....it has gone down to the base coat

 
 
no way other than filling with paint and laquer I'm afraid..

[omega3000]

This is the worst one ...best shot i could get cos of the shine back 

 
bad news.. too long,wide and deep (lower part).. not suitable for a newbie hand.. if you try polishing although the upper part
may give some reult , lower part requires deep work which you may end up with a dull paint without laquer..
 
mask the scratch area and let it sprayed by a professional..

Ooh no can do that ...professional paint shop will cost too much and no doubt they will want to do the whole panel  , ill have a go myself ....it has gone down to the base coat

 
 
no way other than filling with paint and laquer I'm afraid..

Looking at the handy video im going to try that , should come out ok 

Many thanks to all who have helped 

[cem_devecioglu]

This is the worst one ...best shot i could get cos of the shine back 

 
bad news.. too long,wide and deep (lower part).. not suitable for a newbie hand.. if you try polishing although the upper part
may give some reult , lower part requires deep work which you may end up with a dull paint without laquer..
 
mask the scratch area and let it sprayed by a professional..

Ooh no can do that ...professional paint shop will cost too much and no doubt they will want to do the whole panel  , ill have a go myself ....it has gone down to the base coat

 
 
no way other than filling with paint and laquer I'm afraid..

Looking at the handy video im going to try that , should come out ok 

good luck