Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[darrenfos]

On Fitting f/park sensors can i use a fuse jumper cable, and do i use in cig lighter fuse many thanks darren

[darrenfos]

which wire would be best to tap in to for the front park sensors. any help would be good

[TheBoy]

I'd give it its own fused feed.

But front sensors  , is it needed on an Omega 

[darrenfos]

Where to take from, straight from battery with inline fuse

[TheBoy]

What sort of power do they need? Presumably the activation switch will need to be convenient?

I wouldn't pull it from ciggy lighter feed, as that takes enough abuse, but there may be other options depending on power requirements.

[darrenfos]

Its 12v kit

[TheBoy]

Its 12v kit

Current, dear fellow, current

[darrenfos]

Is it the black wire behind ashtray, and just put a inline fuse between. Also what amp fuse would be ok. Thanks

[05omegav6]

Fuse size will depend entirely on the current they draw, in Amps
Any instructions/clues on or in the box...

[darrenfos]

This is it, its in the corner A<30mA typ. does that help

[TheBoy]

This is it, its in the corner A<30mA typ. does that help

And max current?

[darrenfos]

Does this help nominal voltage 12vdc, voltage range 8-16, max consumption <20m.

[TheBoy]

Does this help nominal voltage 12vdc, voltage range 8-16, max consumption <20m.

Nope, unless that last bit is <20mA

But then, if its cheap chinese shite with a poorly translated manual, you're probably on a hiding to nothing.

If there is no max current rating, need the cross section side of the power cables they supplied.

[darrenfos]

There cobra ones £85

[TheBoy]

There cobra ones £85

Even modern Cobra I'd expect decent instructions.

Got a link for the manual/install guide?