Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tunnie]

For the 3.2 LPG Project, I need a V6 Injector loom with the two grey plugs, I need as much loom on the other end as possible. 6-8 inches. (queue jokes here)

Thanks 

[Lazydocker]

To clarify, this is the big grey plug for the injectors. Needs both plug and socket with the wire tails at least 6-8 inches, if not more. It is to build a new loom

[tunnie]

Thanks for clarifying 

[Doctor Gollum]

Thanks for clarifying 

Might have one here...

[zirk]

I might have an upper 3.0 or 3.2 (cant remember which it came from, fairly sure their the same) inlet manifold complete with injectors and rail and its been pre drilled and fitted with LPG Injectors from a OMVL Dream system, also has the Soliniods / Relays and most of the Petrol / LPG Loom etc kicking around somewhere.

I sourced it years ago for my 3.0 LPG Irmscher, as the one fitted on the car was fitted by the Installer by drilling the upper Penlium and injecting from the top, so I was going to swop / correct it etc.

I sold the car a few years back now, and honestly cant remember if I left it in the boot for the new owner or not, will need to check. 

[Doctor Gollum]

Thanks for clarifying 

Might have one here...

ECU to injector loom...



Required to connect the lpg side to the petrol injectors...

[Lazydocker]

Thanks for clarifying 

Might have one here...

ECU to injector loom...



Required to connect the lpg side to the petrol injectors...

Need the other half of it too

[tunnie]

Thanks for clarifying 

Might have one here...

Thanks 

Do you have just the one?

I might have an upper 3.0 or 3.2 (cant remember which it came from, fairly sure their the same) inlet manifold complete with injectors and rail and its been pre drilled and fitted with LPG Injectors from a OMVL Dream system, also has the Soliniods / Relays and most of the Petrol / LPG Loom etc kicking around somewhere.

I sourced it years ago for my 3.0 LPG Irmscher, as the one fitted on the car was fitted by the Installer by drilling the upper Penlium and injecting from the top, so I was going to swop / correct it etc.

I sold the car a few years back now, and honestly cant remember if I left it in the boot for the new owner or not, will need to check. 

Thanks 

Let me know if you do, as I was going OMVL injectors anyway. I guess I could just swap the petrol injectors over if it's a 3.0 manifold.

[Doctor Gollum]

It's the only half I have...

VXL V6 can show you a picture of my spare injector loom as it's built into his LPG loom

Of the two halves, the one pictured is rarer as it usually stays on the car when scrapped, whereas the injector loom tends to come out with inlet manifold/engine

[Lazydocker]

It's the only half I have...

VXL V6 can show you a picture of my spare injector loom as it's built into his LPG loom

Of the two halves, the one pictured is rarer as it usually stays on the car when scrapped, whereas the injector loom tends to come out with inlet manifold/engine

Indeed... Don't bin it

[zirk]

Have you bought the LPG Kit yet Tunnie?

[tunnie]

It's the only half I have...

VXL V6 can show you a picture of my spare injector loom as it's built into his LPG loom

Of the two halves, the one pictured is rarer as it usually stays on the car when scrapped, whereas the injector loom tends to come out with inlet manifold/engine

Cheers. How much do you want for it?

[tunnie]

Have you bought the LPG Kit yet Tunnie?

Not yet, been listing all bits and bobs in a spreadsheet from LPG site, will prob order towards end of the month 

[steve6367]

Have you bought the LPG Kit yet Tunnie?

Not yet, been listing all bits and bobs in a spreadsheet from LPG site, will prob order towards end of the month 

Would you mind sharing the spreadsheet when you get there?

[Kevin Wood]

I believe I have one of the injector looms from under the plenum. Will have to double check. Free to good home.