Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Lazydocker]

and one type makes it impossible

As ever more than happy to be corrected

Much as that's a very kind offer, you're no where near the route from mine to Newent... In fact, totally the wrong way   And you're a Taxi driver             

I seem to recall a mention of relatives in Brighton and was thinking that Suffolk to Brighton, Brighton to Newent via Horsham was not that big a leap

I do have relatives in Brighton but it's at least an extra 100 miles to go via there

It's only about 230 miles from home to Newent going the more direct route

[johnnycboy]

Just to add to this, is it worth noting any specific tools or equipment that may be needed :question

[feeutfo]

Ah, now. Could do with borrowing 300nm torque wrench. Couple of wheel barings to do.

[tunnie]

Ah, now. Could do with borrowing 300nm torque wrench. Couple of wheel barings to do.

I've got one, the fat angry man nice admin could collect it & take it with him?

[TheBoy]

Ah, now. Could do with borrowing 300nm torque wrench. Couple of wheel barings to do.

I've got one, the fat angry man nice admin could collect it & take it with him?

Dont think the Halfords one is man enough, as they should be 320Nm, and Halfords, iirc, is 300Nm

[tunnie]

Ah, now. Could do with borrowing 300nm torque wrench. Couple of wheel barings to do.

I've got one, the fat angry man nice admin could collect it & take it with him?

Dont think the Halfords one is man enough, as they should be 320Nm, and Halfords, iirc, is 300Nm

He said he only wanted 300 Nm 

[TheBoy]

Ah, now. Could do with borrowing 300nm torque wrench. Couple of wheel barings to do.

I've got one, the fat angry man nice admin could collect it & take it with him?

Dont think the Halfords one is man enough, as they should be 320Nm, and Halfords, iirc, is 300Nm

He said he only wanted 300 Nm 

Gayboy often talks bollax....

[TheBoy]

Tunnie, why do you have a 300Nm torque wrench? You aint strong enough...

[feeutfo]

Ah, now. Could do with borrowing 300nm torque wrench. Couple of wheel barings to do.

I've got one, the fat angry man nice admin could collect it & take it with him?

Dont think the Halfords one is man enough, as they should be 320Nm, and Halfords, iirc, is 300Nm

He said he only wanted 300 Nm 

Sorry, my mistake, thought they where 300nms 

[Lazydocker]

Not sure what mine goes up to... I'll check later

[TheBoy]

I know Mr DTM has a big one. Torque wrench, that is...

[paul.lovejoy]

would like some help advice on my knocking noise on start up and turn off. I think we have definatley established its from the gearbox end of things. Starter motor replaced.

i get a couple of knocks on start up and sometimes the odd one when i trurn the engine off, Daz just replaced belts etc and marked pully wheeels turned engine by hand and the knock appeared always at the same point

Apart fromm that car / engine runs very smooth no knoks vibrations leakes etc plenty of pull, drives without fault

trying desperatley to get to Newent and get some advice will make sure beers and largers are in boot to ensure throats remain lubricated to help speach

http://photobucket.com/omega26a

thanks

paul

[Lazydocker]

I'd be looking at starter/flywheel issues... Possibly a broken tooth :-/ :-/

[feeutfo]

I'd be looking at starter/flywheel issues... Possibly a broken tooth :-/ :-/

Or something jammed in between teeth... :-/

[Kevin Wood]

Starter wouldn't knock on shutdown, though. :-/

I wonder if the torque converter has worked loose from the driveplate, or perhaps the drive from TC to gearbox oil pump has a bit of slack in it?

Thrust washer? :-/

Or bellhousing bolts loose?

Foreign object in bell housing?

Either way, a few ears under it will soon find something.