Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Mr.OmegaMan]

Fixed the 3.2 all's well again 

[TheBoy]

Filled the bullet up with LPG to conceal the economy .  Needs petrol as well, as I forgot I'd manually flicked to petrol whilst swapping cars around last night  .  So all that fun with that useless, gay beemer driver earlier, all on petrol. A cardinal sin.

[05omegav6]

Filled the bullet up with LPG to conceal the economy .  Needs petrol as well, as I forgot I'd manually flicked to petrol whilst swapping cars around last night  .  So all that fun with that useless, gay beemer driver earlier, all on petrol. A cardinal sin.

Bet it felt good though

[mmcg]

Washed and waxed the frontera 3.2.

[Kevin Wood]

Early start for a trip down to Horsham with the glider trailer in tow for the glider's annual. Didn't bat an eyelid, easily kept up with the traffic and showed 24 MPG. A great tow car.

Last trailer I towed, I complained that one of the indicators didn't work. Same with this one. Guess I'd better check the wiring in the socket.

[dbug]

Full service on the Estate. Plus 2 new front tyres (to replace worn Goodyears) - 2 Enduros to match the 2 nearly new rears.

[TheBoy]

Motorbike insurance assessor came out today. Agreed it was a total loss. No shit, Sherlock.

[doz]

Change driveshafts, still have shit vibration. Looks like me and the mig are gonna part ways

[tunnie]

Motorbike insurance assessor came out today. Agreed it was a total loss. No shit, Sherlock.

 

[BazaJT]

Well after just over a year of ownership and running around on wheels with flaking laquer,I've finally got round to prepping and painting them!!Not to everyones taste but I've gone for a "two tone"effect,the faces of the "spokes"and the thin rim between them I've painted in alloy silver whilst for the sides of the "spokes" and the inset between them[such as where the tyre valve is]I've painted in what they call steel.I think they look pretty decent done like this without being too "in yer face"

[TheBoy]

Well after just over a year of ownership and running around on wheels with flaking laquer,I've finally got round to prepping and painting them!!Not to everyones taste but I've gone for a "two tone"effect,the faces of the "spokes"and the thin rim between them I've painted in alloy silver whilst for the sides of the "spokes" and the inset between them[such as where the tyre valve is]I've painted in what they call steel.I think they look pretty decent done like this without being too "in yer face"

Pics!

[Andy H]

Change driveshafts, still have shit vibration. Looks like me and the mig are gonna part ways

Pound to a penny your brake discs have worn unevenly (or rust has built up on the rim and flaked off unevenly).

Fit new TC brake discs & pads and return to vibration free motoring (with the added bonus of confidence inspiring brakes  )

[henryd]

Change driveshafts, still have shit vibration. Looks like me and the mig are gonna part ways

Pound to a penny your brake discs have worn unevenly (or rust has built up on the rim and flaked off unevenly).

Fit new TC brake discs & pads and return to vibration free motoring (with the added bonus of confidence inspiring brakes  )

 I think Doz has already done discs,pads and calipers at the rear to try and eliminate this

[omega3000]

Removed lower front engine mount , what a pig of a bolt to get out  And you lot think the bstad bolt is hard 

[Mr.OmegaMan]

Broken the 2.2 .... 

The brake pipe or pipes burst at the rear in a concealed area, Whatever next..

Although luckily it happened on the driveway, Could have been much worse.