Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Shackeng]

Finished the rear handbrake shoes and disc change on the TD. I hope I never have to do that again, definitely a job where two pairs of hands would be useful.

[TheBoy]

How long! 'He's not the messiah, he's a very naughty The Boy'

Mrs TB has put her foot down about jacks in the kitchen.  I'm not allowed a jack until I have a garage 

As you saw, scissor jack works. Will fit in't boot.

What was that jack off?  I may one of them

[chrisgixer]

How long! 'He's not the messiah, he's a very naughty The Boy'

Mrs TB has put her foot down about jacks in the kitchen.  I'm not allowed a jack until I have a garage 

As you saw, scissor jack works. Will fit in't boot.

What was that jack off?  I may one of them

....off? A shop.

Suggest a two ton job, if it fits under.

[TheBoy]

Ah, assumed you'd nicked it off a scrapyard car

Doubt anywhere round here sells such things....

[henryd]

Filled it up when the light came on... 55litres of Shells finest devil juice... 36mpg from the first tank

That'll improve,new diesels are always down for the first couple of thousand miles

[chrisgixer]

Ah, assumed you'd nicked it off a scrapyard car

Doubt anywhere round here sells such things....

There's always internet shops.
http://www.ebay.co.uk/itm/like/400565334781?hlpht=true&ops=true&viphx=1&lpid=95&device=t&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=95

[aaronjb]

Ah, assumed you'd nicked it off a scrapyard car

Doubt anywhere round here sells such things....

There's always internet shops.
http://www.ebay.co.uk/itm/like/400565334781?hlpht=true&ops=true&viphx=1&lpid=95&device=t&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=95

doesn't 'egay' fall under the same heading as 'youtube' and 'arsebook' for TB, though?

[Sir Tigger KC]

Have been keeping it below 2k so far

Only done 468 miles and mostly urban/in traffic... about 15mpg up on the Omega without really trying...

I didn't think you had to 'run in' new cars these days and the advise is to just drive them normally? 

Unless you're called 'The Boy' of course!!   

[chrisgixer]

Ah, assumed you'd nicked it off a scrapyard car

Doubt anywhere round here sells such things....

There's always internet shops.
http://www.ebay.co.uk/itm/like/400565334781?hlpht=true&ops=true&viphx=1&lpid=95&device=t&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=95

doesn't 'egay' fall under the same heading as 'youtube' and 'arsebook' for TB, though?

It's me that hates ebay. He's bought stuff of ebay on my behalf before, just for a peacefull life.

Bless him.

[TheBoy]

He's bought stuff of ebay on my behalf before, just for a peacefull life.

Sometimes its just easier

[05omegav6]

Have been keeping it below 2k so far

Only done 468 miles and mostly urban/in traffic... about 15mpg up on the Omega without really trying...

I didn't think you had to 'run in' new cars these days and the advise is to just drive them normally? 

Unless you're called 'The Boy' of course!!   

Was told to take it steady for the first thousand or so

[cd 2.2]

Finished re-grinding all 16 of my valves today and fitted them to my shiny new skimmed head also test fitted the cams ... when will this job ever end?? 

[Kevin Wood]

Have been keeping it below 2k so far

Only done 468 miles and mostly urban/in traffic... about 15mpg up on the Omega without really trying...

I didn't think you had to 'run in' new cars these days and the advise is to just drive them normally? 

Unless you're called 'The Boy' of course!!   

Was told to take it steady for the first thousand or so

Bah! "Build 'em well, then give 'em hell" as a dearly departed friend of mine used to say.

[05omegav6]

  Not entirely convinced on the first part, plenty of time for the second bit though

[Marks DTM Calib]

Finished re-grinding all 16 of my valves today and fitted them to my shiny new skimmed head also test fitted the cams ... when will this job ever end?? 

Be thankful, I am twelve valves into 24V.....and have ran out of ginding paste grrrrr....