Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[STEMO]

I put mine through an up and over this morning, but I did have to queue for 20 minutes.

[TheBoy]

I put mine through an up and over this morning, but I did have to queue for 20 minutes.

JLR warn not to do that.

An Indian car built by brummies. Hmmm, I see their point

[Sir Tigger KC]

I put mine through an up and over this morning, but I did have to queue for 20 minutes.

These new fangled contraptions haven't made it to my part of Darzetzhire yet.   

Nor over the borders in Debenzhere or Zummerzet either... 

[STEMO]

I put mine through an up and over this morning, but I did have to queue for 20 minutes.

These new fangled contraptions haven't made it to my part of Darzetzhire yet.   

They're ace. Wash, rinse, wax, dry and wheels half washed for £3.80 

[ronnyd]

I put mine through an up and over this morning, but I did have to queue for 20 minutes.

These new fangled contraptions haven't made it to my part of Darzetzhire yet.   

They're ace. Wash, rinse, wax, dry and wheels half washed for £3.80 

If you're really lucky you might even get some of the sides done too. 

[TheBoy]

Removed all personal possessions from TBE  , then drove it to the chippie, and remembered what a good car the Omega is.

[Doctor Gollum]

You'll miss it, but if you don't want to fix it, then it's time to let it go

[Migv6 le Frog Fan]

Still trying to get the turbo off the C lio. One of the four 10mm nuts that joins the cat to the turbo is rounded, and of course its th one that you cant even see, and can only work on by feel.
Stuck now not sure what to do. Might just get the lump hammer and chisel out tomorrow and lose my temper with it and see what happens.
Sick and tired of the bloody thing now.

[Raeturbo]

You’re not going to do that job twice

[GastronomicKleptomaniac]

Cut two dampers off the newly arrived Civic. Well known for seizing solid, the first one took me a while, the second one I showed no mercy.  Satisfying.

[Raeturbo]

Never show mercy, Tora tora tora!

[Migv6 le Frog Fan]

You’re not going to do that job twice

Not even sure I will get it finished once at this point. A second time would definitely be either a box of matches or over a cliff.

[Doctor Gollum]

Part ex it for another diesel 190 whilst you still can

[cam.in.head]

after having some paintwork done. rectified some minor issues found on return.
number plates refitted straight !
rear bumper bottom fittings refitted
under headlight trim refitted straight
badges refitted
some overspray removed on inner arch plastics
also but not garages fault
shimmed both front check straps bushes to solve cracking noise
replaced rear indicator bulbs which were not very orange
changed aux belt for non aircon one
resoldered rear door speaker cone leads on one side

[YZ250]

Still trying to get the turbo off the C lio. One of the four 10mm nuts that joins the cat to the turbo is rounded, and of course its th one that you cant even see, and can only work on by feel.
Stuck now not sure what to do. Might just get the lump hammer and chisel out tomorrow and lose my temper with it and see what happens.
Sick and tired of the bloody thing now.

Do you know anyone with an Irwin (Bolt Remover) Socket Set that you could borrow. They are designed to bite in to mullered bolt heads when undoing. If it's a stud and nut you'd have to make sure the socket was deep enough.